{"id":595,"date":"2026-07-09T09:31:09","date_gmt":"2026-07-09T09:31:09","guid":{"rendered":"https:\/\/isbmsystem.com\/?post_type=product&#038;p=595"},"modified":"2026-07-10T07:21:17","modified_gmt":"2026-07-10T07:21:17","slug":"automatic-one-step-injection-blow-molding-machine-ep60-600kn-pharma-cosmetic-bottle-manufacturer","status":"publish","type":"product","link":"https:\/\/isbmsystem.com\/es\/producto\/automatic-one-step-injection-blow-molding-machine-ep60-600kn-pharma-cosmetic-bottle-manufacturer\/","title":{"rendered":"M\u00e1quina autom\u00e1tica de moldeo por inyecci\u00f3n-soplado de un solo paso EP60 600KN para fabricantes de botellas farmac\u00e9uticas y cosm\u00e9ticas"},"content":{"rendered":"<div style=\"font-family: 'Segoe UI',Arial,sans-serif; color: #333; background: #fff; max-width: 1200px; margin: 0 auto; padding: 0;\">\n<p><!-- HERO SECTION --><\/p>\n<section style=\"background: linear-gradient(135deg,#0d2b52 0%,#1a4a8a 60%,#2060b0 100%); color: #fff; padding: 48px 40px 40px; position: relative; overflow: hidden;\">\n<div style=\"position: absolute; top: 0; right: 0; width: 300px; height: 100%; background: rgba(255,255,255,0.03); clip-path: polygon(30% 0,100% 0,100% 100%,0% 100%);\"><\/div>\n<p style=\"font-size: clamp(0.85rem,1.8vw,1rem); letter-spacing: 3px; text-transform: uppercase; color: #90b8e8; margin: 0 0 12px;\">EVER POWER &#8211; Professional IBM Manufacturer<\/p>\n<h1 style=\"font-size: clamp(1.4rem,3.5vw,2.2rem); font-weight: bold; margin: 0 0 14px; line-height: 1.3; color: #fff;\">EVER POWER EP60 Injection Blow Molding Machine<\/h1>\n<p style=\"font-size: clamp(1rem,2.2vw,1.25rem); color: #b8d4f4; margin: 0 0 28px; line-height: 1.6;\">One-Step Flash-Free Molding &#8211; Three-Station Fully Automatic IBM for Pharma and Cosmetic Bottles<\/p>\n<div style=\"display: flex; flex-wrap: wrap; gap: 12px; margin-bottom: 32px;\">\n<div style=\"background: rgba(255,255,255,0.1); border: 1px solid rgba(255,255,255,0.2); border-radius: 6px; padding: 10px 16px; font-size: clamp(0.85rem,1.8vw,1rem);\"><strong style=\"color: #ffcf40;\">Fuerza de sujeci\u00f3n:<\/strong> 600 KN<\/div>\n<div style=\"background: rgba(255,255,255,0.1); border: 1px solid rgba(255,255,255,0.2); border-radius: 6px; padding: 10px 16px; font-size: clamp(0.85rem,1.8vw,1rem);\"><strong style=\"color: #ffcf40;\">Ciclo de secado:<\/strong> 4 S<\/div>\n<div style=\"background: rgba(255,255,255,0.1); border: 1px solid rgba(255,255,255,0.2); border-radius: 6px; padding: 10px 16px; font-size: clamp(0.85rem,1.8vw,1rem);\"><strong style=\"color: #ffcf40;\">Peso de la inyecci\u00f3n:<\/strong> 260\/383 g<\/div>\n<div style=\"background: rgba(255,255,255,0.1); border: 1px solid rgba(255,255,255,0.2); border-radius: 6px; padding: 10px 16px; font-size: clamp(0.85rem,1.8vw,1rem);\"><strong style=\"color: #ffcf40;\">Potencia del motor:<\/strong> 18.5\/22 KW<\/div>\n<\/div>\n<ul style=\"list-style: none; padding: 0; margin: 0 0 32px; display: flex; flex-wrap: wrap; gap: 10px 24px;\">\n<li style=\"font-size: clamp(0.9rem,1.9vw,1.05rem); color: #d0e6ff; display: flex; align-items: center; gap: 8px;\"><span style=\"color: #4fc3f7; font-size: 1.1rem;\">\u2713<\/span> Full European-style structure &#8211; clamping force 20-30% above industry average<\/li>\n<li style=\"font-size: clamp(0.9rem,1.9vw,1.05rem); color: #d0e6ff; display: flex; align-items: center; gap: 8px;\"><span style=\"color: #4fc3f7; font-size: 1.1rem;\">\u2713<\/span> Three-station rotary automatic cycle &#8211; injection, blow, stripping simultaneous<\/li>\n<li style=\"font-size: clamp(0.9rem,1.9vw,1.05rem); color: #d0e6ff; display: flex; align-items: center; gap: 8px;\"><span style=\"color: #4fc3f7; font-size: 1.1rem;\">\u2713<\/span> 99.9% flash-free neck finish &#8211; no deflashing, no parting line on bottle mouth<\/li>\n<li style=\"font-size: clamp(0.9rem,1.9vw,1.05rem); color: #d0e6ff; display: flex; align-items: center; gap: 8px;\"><span style=\"color: #4fc3f7; font-size: 1.1rem;\">\u2713<\/span> Materiales: HDPE, LDPE, PP, PS, ABS, EVA, PCTG, biorresinas a base de ma\u00edz<\/li>\n<li style=\"font-size: clamp(0.9rem,1.9vw,1.05rem); color: #d0e6ff; display: flex; align-items: center; gap: 8px;\"><span style=\"color: #4fc3f7; font-size: 1.1rem;\">\u2713<\/span> CE \/ ISO certified &#8211; GMP-ready production environment<\/li>\n<\/ul>\n<div style=\"display: flex; flex-wrap: wrap; gap: 14px;\"><a style=\"display: inline-block; background: #ffcf40; color: #0d2b52; font-weight: bold; padding: 14px 28px; border-radius: 6px; text-decoration: none; font-size: clamp(0.9rem,2vw,1.05rem);\" href=\"https:\/\/isbmsystem.com\/es\/product-category\/isbm-machine\/\">Solicita un presupuesto<\/a><br \/>\n<a style=\"display: inline-block; background: transparent; color: #fff; font-weight: 600; padding: 14px 28px; border-radius: 6px; text-decoration: none; font-size: clamp(0.9rem,2vw,1.05rem); border: 2px solid rgba(255,255,255,0.4);\" href=\"https:\/\/isbmsystem.com\/es\/sobre-nosotros\/\">Acerca de EVER POWER<\/a><\/div>\n<\/section>\n<p><!-- MACHINE IMAGE --><\/p>\n<section style=\"padding: 0;\"><img decoding=\"async\" style=\"width: 100%; height: auto; display: block; object-fit: cover; max-height: 480px;\" src=\"https:\/\/isbmsystem.com\/wp-content\/uploads\/2026\/07\/EP60-Injection-Blow-Molding-Machine-European.webp\" alt=\"EVER POWER EP60 injection blow molding machine factory floor\" \/><!-- PRODUCT OVERVIEW & PROCESS PRINCIPLE --><\/section>\n<section style=\"padding: 48px 40px;\">\n<h2 style=\"font-size: clamp(1.2rem,2.8vw,1.7rem); color: #0d2b52; margin: 0 0 18px; border-bottom: 3px solid #1a6bbf; padding-bottom: 10px;\">What Is the EVER POWER EP60 One-Step Injection Blow Molding Machine?<\/h2>\n<p style=\"font-size: clamp(0.95rem,2vw,1.1rem); color: #444; line-height: 1.85; margin: 0 0 16px;\">The EVER POWER EP60 is a fully automatic one-step IBM (Injection Blow Molding) machine engineered for precision hollow container production. As a dedicated <strong>fabricante de m\u00e1quinas de moldeo por inyecci\u00f3n-soplado<\/strong>, EVER POWER has concentrated decades of tooling and process expertise into this model, delivering a machine where the entire bottle &#8211; from preform injection to final blowing to ejection &#8211; is completed in a single machine cycle without operator intervention, without material transfer between machines, and without the flash and parting-line waste that characterize extrusion blow systems.<\/p>\n<p style=\"font-size: clamp(0.95rem,2vw,1.1rem); color: #444; line-height: 1.85; margin: 0 0 16px;\">Este <strong>una m\u00e1quina IBM de un paso<\/strong> is the preferred choice for pharmaceutical bottle blowing and cosmetic container manufacturing where dimensional consistency is non-negotiable. Each cycle on the EP60 runs three simultaneous operations: while new preforms are being injection-molded at Station 1, the previous batch is being blown to final shape at Station 2, and the completed bottles from Station 2 are being stripped and conveyed to the outfeed conveyor at Station 3. This triaxial parallelism means the productive output equals the injection cycle time alone &#8211; not the sum of injection plus blowing plus ejection &#8211; giving the EP60 a significant throughput advantage over two-stage stretch blow systems for small and medium volume containers.<\/p>\n<p><img decoding=\"async\" style=\"width: 100%; max-width: 760px; height: auto; display: block; margin: 24px auto; border-radius: 8px; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\" src=\"https:\/\/isbmsystem.com\/wp-content\/uploads\/2026\/07\/Opear-Ting-Principle1.webp\" alt=\"Diagrama del principio de funcionamiento de un paso de IBM Estaci\u00f3n 1 Inyecci\u00f3n Estaci\u00f3n 2 Soplado Estaci\u00f3n 3 Desmoldeo\" \/><\/p>\n<h3 style=\"font-size: clamp(1.05rem,2.3vw,1.35rem); color: #1a3a6b; margin: 24px 0 12px;\">Three-Station Process: How the EP60 Works<\/h3>\n<div style=\"display: flex; flex-wrap: wrap; gap: 20px; margin-bottom: 24px;\">\n<div style=\"background: #f4f8ff; border-radius: 8px; padding: 22px 24px; flex: 1; min-width: 240px; border-top: 4px solid #1a6bbf; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\">\n<p><strong style=\"color: #1a3a6b; font-size: 1.05rem; display: block; margin-bottom: 10px;\">Station 1 &#8211; Preform Injection<\/strong><\/p>\n<p style=\"font-size: 0.97rem; color: #444; line-height: 1.75; margin: 0;\">Los gr\u00e1nulos de pl\u00e1stico se funden en el cilindro y se inyectan en la cavidad de inyecci\u00f3n bajo presi\u00f3n controlada. El cuello de la botella y la geometr\u00eda de la rosca se forman con precisi\u00f3n en el molde de inyecci\u00f3n. El molde se abre y el mandril que contiene la preforma caliente se transfiere a la Estaci\u00f3n 2 mediante la torreta giratoria.<\/p>\n<\/div>\n<div style=\"background: #f4f8ff; border-radius: 8px; padding: 22px 24px; flex: 1; min-width: 240px; border-top: 4px solid #0e8a3e; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\">\n<p><strong style=\"color: #1a3a6b; font-size: 1.05rem; display: block; margin-bottom: 10px;\">Station 2 &#8211; Blow Molding<\/strong><\/p>\n<p style=\"font-size: 0.97rem; color: #444; line-height: 1.75; margin: 0;\">La preforma caliente se infla con aire comprimido procedente del n\u00facleo del mandril. La forma de la botella viene determinada por completo por la cavidad del molde de soplado. El aire infla la preforma hacia afuera contra las paredes enfriadas del molde, y la botella adquiere sus dimensiones finales. El molde se abre y la torreta avanza hasta la Estaci\u00f3n 3.<\/p>\n<\/div>\n<div style=\"background: #f4f8ff; border-radius: 8px; padding: 22px 24px; flex: 1; min-width: 240px; border-top: 4px solid #b07000; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\">\n<p><strong style=\"color: #1a3a6b; font-size: 1.05rem; display: block; margin-bottom: 10px;\">Station 3 &#8211; Ejection and Conveying<\/strong><\/p>\n<p style=\"font-size: 0.97rem; color: #444; line-height: 1.75; margin: 0;\">The finished, cooled bottles are stripped from the mandrels and discharged onto the outfeed conveyor. Since all three stations operate simultaneously, the cycle repeats continuously. There is no secondary operation, no deflashing press, and no bottle reheating required &#8211; the three operations share one cycle clock.<\/p>\n<\/div>\n<\/div>\n<p><img decoding=\"async\" style=\"width: 100%; max-width: 760px; height: auto; display: block; margin: 24px auto; border-radius: 8px; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\" src=\"https:\/\/isbmsystem.com\/wp-content\/uploads\/2026\/07\/Opear-Ting-Principle.webp\" alt=\"Principio de funcionamiento de una m\u00e1quina de moldeo por inyecci\u00f3n-soplado de tres estaciones con mandril y torreta giratoria.\" \/><\/p>\n<\/section>\n<p><!-- TECHNICAL PARAMETERS TABLE --><\/p>\n<section style=\"padding: 0 40px 48px; background: #f7f9fc;\">\n<h2 style=\"font-size: clamp(1.2rem,2.8vw,1.7rem); color: #0d2b52; margin: 0 0 22px; padding-top: 40px; border-bottom: 3px solid #1a6bbf; padding-bottom: 10px;\">Main Technical Parameters &#8211; EVER POWER EP60<\/h2>\n<div style=\"overflow-x: auto;\">\n<table style=\"width: 100%; border-collapse: collapse; font-size: clamp(0.85rem,1.8vw,1rem); min-width: 520px;\">\n<thead>\n<tr>\n<th style=\"background: #1a3a6b; color: #fff; padding: 12px 16px; text-align: left; border: 1px solid #2a4e8b;\">Par\u00e1metro<\/th>\n<th style=\"background: #1a3a6b; color: #fff; padding: 12px 16px; text-align: left; border: 1px solid #2a4e8b;\">Art\u00edculo (EN)<\/th>\n<th style=\"background: #1a3a6b; color: #fff; padding: 12px 16px; text-align: center; border: 1px solid #2a4e8b;\">Unidad<\/th>\n<th style=\"background: #ffcf40; color: #0d2b52; padding: 12px 16px; text-align: center; border: 1px solid #2a4e8b; font-weight: bold;\">EP60<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr style=\"background: #eef2fb;\">\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; font-weight: bold; color: #1a3a6b; font-size: 0.95rem;\" colspan=\"4\">Sistema de inyecci\u00f3n<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Di\u00e1metro del tornillo<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Di\u00e1metro del tornillo<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">mm<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">45\/50 mm<\/td>\n<\/tr>\n<tr style=\"background: #f7f9fc;\">\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Relaci\u00f3n L\/D del tornillo<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Tornillo L\/D<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">&#8211;<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">22:1<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Peso de inyecci\u00f3n<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Peso de inyecci\u00f3n<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">gramo<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">260\/383 g<\/td>\n<\/tr>\n<tr style=\"background: #f7f9fc;\">\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Potencia de calentamiento<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Potencia de calentamiento<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">KW<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">14 KW<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Zonas de calentamiento del barril<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">N\u00famero de zonas de barril<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">&#8211;<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">3+N<\/td>\n<\/tr>\n<tr style=\"background: #f7f9fc;\">\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Accidente cerebrovascular por inyecci\u00f3n<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Accidente cerebrovascular por inyecci\u00f3n<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">mm<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">160 mm<\/td>\n<\/tr>\n<tr style=\"background: #eef2fb;\">\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; font-weight: bold; color: #1a3a6b; font-size: 0.95rem;\" colspan=\"4\">Sistema de sujeci\u00f3n<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Fuerza de sujeci\u00f3n de inyecci\u00f3n<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Fuerza de sujeci\u00f3n de la inyecci\u00f3n<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">KN<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">600<\/td>\n<\/tr>\n<tr style=\"background: #f7f9fc;\">\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Carrera de apertura de la inyecci\u00f3n<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Carrera de apertura para la inyecci\u00f3n<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">mm<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">140 mm<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Fuerza de sujeci\u00f3n por golpe<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Fuerza de sujeci\u00f3n del soplado<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">KN<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">100<\/td>\n<\/tr>\n<tr style=\"background: #f7f9fc;\">\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Golpe de apertura<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Golpe de apertura para soplar<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">mm<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">140 mm<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Altura del elevador de torre<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Altura de elevaci\u00f3n de la mesa giratoria<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">mm<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">70 mm<\/td>\n<\/tr>\n<tr style=\"background: #eef2fb;\">\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; font-weight: bold; color: #1a3a6b; font-size: 0.95rem;\" colspan=\"4\">Moho<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Tama\u00f1o m\u00e1ximo de la platina (largo x ancho)<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Tama\u00f1o m\u00e1ximo de la platina (largo x ancho)<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">mm<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">600&#215;390 mm<\/td>\n<\/tr>\n<tr style=\"background: #f7f9fc;\">\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Grosor del molde<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Grosor del molde<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">mm<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">240 mm<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Di\u00e1metro m\u00e1ximo de la botella<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Di\u00e1metro de la botella<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">mm<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">120 mm<\/td>\n<\/tr>\n<tr style=\"background: #f7f9fc;\">\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Altura m\u00e1xima de la botella<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Altura de la botella<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">mm<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">220 mm<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Rango de volumen de la botella<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Volumen de botella adecuado<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">ml<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">1-2000<\/td>\n<\/tr>\n<tr style=\"background: #f7f9fc;\">\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Trazo de desprendimiento<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Trazo de desprendimiento<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">mm<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">230 mm<\/td>\n<\/tr>\n<tr style=\"background: #eef2fb;\">\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; font-weight: bold; color: #1a3a6b; font-size: 0.95rem;\" colspan=\"4\">Sistema hidr\u00e1ulico<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Presi\u00f3n hidr\u00e1ulica<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Presi\u00f3n hidr\u00e1ulica<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">MPa<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">14<\/td>\n<\/tr>\n<tr style=\"background: #f7f9fc;\">\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Potencia del motor<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Potencia del motor<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">KW<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">18.5\/22 KW<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Tiempo de ciclo de secado<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Ciclo seco<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">S<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">4<\/td>\n<\/tr>\n<tr style=\"background: #f7f9fc;\">\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Potencia total<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Potencia total<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">KW<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">37<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Potencia operativa<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Potencia operativa<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">%<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">52-70<\/td>\n<\/tr>\n<tr style=\"background: #eef2fb;\">\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; font-weight: bold; color: #1a3a6b; font-size: 0.95rem;\" colspan=\"4\">Otros par\u00e1metros<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Presi\u00f3n de aire comprimido<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Presi\u00f3n m\u00ednima del aire<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">MPa<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">0.7-1.2<\/td>\n<\/tr>\n<tr style=\"background: #f7f9fc;\">\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Capacidad de aire<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Capacidad de aire comprimido<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">M3\/min<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">0.7<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Flujo de agua de refrigeraci\u00f3n<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Flujo de agua<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">M3\/h<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">4<\/td>\n<\/tr>\n<tr style=\"background: #f7f9fc;\">\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Presi\u00f3n del agua de refrigeraci\u00f3n<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Presi\u00f3n del agua de refrigeraci\u00f3n<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">MPa<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">0.3-0.4<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Dimensiones (largo x ancho x alto)<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Dimensiones generales<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">METRO<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">3.8&#215;1.4&#215;1.8 M<\/td>\n<\/tr>\n<tr style=\"background: #f7f9fc;\">\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Peso neto<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; color: #555;\">Peso neto<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; color: #555;\">Tonelada<\/td>\n<td style=\"padding: 9px 16px; border: 1px solid #dde3ee; text-align: center; font-weight: 600; color: #1a3a6b;\">5 Ton<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<p style=\"font-size: 0.83rem; color: #888; margin: 10px 0 0;\">Nota: Todos los par\u00e1metros son solo de referencia. EVER POWER se reserva el derecho de modificar las especificaciones debido a mejoras en los equipos.<\/p>\n<h3 style=\"font-size: clamp(1rem,2.2vw,1.25rem); color: #1a3a6b; margin: 32px 0 14px;\">Max Cavity Count per Container Volume (EP60 &#8211; For Reference)<\/h3>\n<div style=\"overflow-x: auto;\">\n<table style=\"border-collapse: collapse; font-size: clamp(0.85rem,1.8vw,1rem); min-width: 480px;\">\n<thead>\n<tr>\n<th style=\"background: #1a3a6b; color: #fff; padding: 10px 16px; border: 1px solid #2a4e8b; text-align: left;\">Volumen<\/th>\n<th style=\"padding: 8px 12px; border: 1px solid #dde3ee; background: #e8eef8; font-size: 0.85rem; color: #1a3a6b;\">10 ml<\/th>\n<th style=\"padding: 8px 12px; border: 1px solid #dde3ee; background: #e8eef8; font-size: 0.85rem; color: #1a3a6b;\">30 ml<\/th>\n<th style=\"padding: 8px 12px; border: 1px solid #dde3ee; background: #e8eef8; font-size: 0.85rem; color: #1a3a6b;\">60 ml<\/th>\n<th style=\"padding: 8px 12px; border: 1px solid #dde3ee; background: #e8eef8; font-size: 0.85rem; color: #1a3a6b;\">100 ml<\/th>\n<th style=\"padding: 8px 12px; border: 1px solid #dde3ee; background: #e8eef8; font-size: 0.85rem; color: #1a3a6b;\">250 ml<\/th>\n<th style=\"padding: 8px 12px; border: 1px solid #dde3ee; background: #e8eef8; font-size: 0.85rem; color: #1a3a6b;\">500 ml<\/th>\n<th style=\"padding: 8px 12px; border: 1px solid #dde3ee; background: #e8eef8; font-size: 0.85rem; color: #1a3a6b;\">1000 ml<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"padding: 8px 12px; border: 1px solid #dde3ee; font-weight: 600; color: #1a3a6b; background: #f4f8ff;\">Caries m\u00e1ximas<\/td>\n<td style=\"padding: 8px 12px; border: 1px solid #dde3ee; text-align: center; color: #333;\">14<\/td>\n<td style=\"padding: 8px 12px; border: 1px solid #dde3ee; text-align: center; color: #333;\">12<\/td>\n<td style=\"padding: 8px 12px; border: 1px solid #dde3ee; text-align: center; color: #333;\">10<\/td>\n<td style=\"padding: 8px 12px; border: 1px solid #dde3ee; text-align: center; color: #333;\">8<\/td>\n<td style=\"padding: 8px 12px; border: 1px solid #dde3ee; text-align: center; color: #333;\">5<\/td>\n<td style=\"padding: 8px 12px; border: 1px solid #dde3ee; text-align: center; color: #333;\">3<\/td>\n<td style=\"padding: 8px 12px; border: 1px solid #dde3ee; text-align: center; color: #333;\">2<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/section>\n<p><!-- CORE HARDWARE HIGHLIGHTS --><\/p>\n<section style=\"padding: 48px 40px; background: #fff;\">\n<h2 style=\"font-size: clamp(1.2rem,2.8vw,1.7rem); color: #0d2b52; margin: 0 0 24px; border-bottom: 3px solid #1a6bbf; padding-bottom: 10px;\">Core Hardware Architecture of the EP60<\/h2>\n<div style=\"display: flex; flex-wrap: wrap; gap: 18px;\">\n<div style=\"background: #f4f8ff; border-radius: 8px; padding: 20px 22px; flex: 1; min-width: 200px; box-shadow: 0 4px 6px rgba(0,0,0,0.1); border-top: 3px solid #1a6bbf;\">\n<p><strong style=\"color: #1a3a6b; display: block; margin-bottom: 8px; font-size: 1.02rem;\">Estructura de acero completa de estilo europeo<\/strong><\/p>\n<p style=\"font-size: 0.95rem; color: #555; line-height: 1.7; margin: 0;\">CNC-machined monolithic machine bed and platen mounts ensure parallelism between injection and blow clamping platens. Tie-bar surfaces are induction-hardened. The EP60 clamping force is 20-30% above equivalent-tonnage competitors due to the boosted pressurized clamping structure.<\/p>\n<\/div>\n<div style=\"background: #f4f8ff; border-radius: 8px; padding: 20px 22px; flex: 1; min-width: 200px; box-shadow: 0 4px 6px rgba(0,0,0,0.1); border-top: 3px solid #0e8a3e;\">\n<p><strong style=\"color: #1a3a6b; display: block; margin-bottom: 8px; font-size: 1.02rem;\">Tornillo y barril bimet\u00e1licos<\/strong><\/p>\n<p style=\"font-size: 0.95rem; color: #555; line-height: 1.7; margin: 0;\">The plasticizing unit uses a bimetallic-lined barrel and a hardened alloy screw rated for glass-fiber and mineral-filled compounds. The EP60 screw diameter of 45\/50 mm at 22:1 L\/D delivers thorough homogenization with a 260\/383 g shot capacity, covering the full range of bottle weights for this tonnage class.<\/p>\n<\/div>\n<div style=\"background: #f4f8ff; border-radius: 8px; padding: 20px 22px; flex: 1; min-width: 200px; box-shadow: 0 4px 6px rgba(0,0,0,0.1); border-top: 3px solid #b07000;\">\n<p><strong style=\"color: #1a3a6b; display: block; margin-bottom: 8px; font-size: 1.02rem;\">Control hidr\u00e1ulico de v\u00e1lvula proporcional<\/strong><\/p>\n<p style=\"font-size: 0.95rem; color: #555; line-height: 1.7; margin: 0;\">Tanto la presi\u00f3n de inyecci\u00f3n como la de soplado se regulan mediante v\u00e1lvulas hidr\u00e1ulicas servoproporcionales. Esto permite un perfilado de inyecci\u00f3n en varias etapas (velocidad de llenado, conmutaci\u00f3n, presi\u00f3n de compactaci\u00f3n) para preformas de paredes delgadas, y un control preciso de la rampa de presi\u00f3n de soplado que elimina los defectos de apelmazamiento radial comunes en los sistemas de v\u00e1lvulas de soplado de una sola etapa.<\/p>\n<\/div>\n<div style=\"background: #f4f8ff; border-radius: 8px; padding: 20px 22px; flex: 1; min-width: 200px; box-shadow: 0 4px 6px rgba(0,0,0,0.1); border-top: 3px solid #8a1a6b;\">\n<p><strong style=\"color: #1a3a6b; display: block; margin-bottom: 8px; font-size: 1.02rem;\">Sistema de control PLC con pantalla t\u00e1ctil<\/strong><\/p>\n<p style=\"font-size: 0.95rem; color: #555; line-height: 1.7; margin: 0;\">The EP60 control panel runs a full-color PLC touch-screen with parameter recipe storage. All process variables &#8211; temperatures, pressures, velocities, timings &#8211; are set and monitored from a single screen. Alarm history, production counters and fault codes are logged and displayed in real time.<\/p>\n<\/div>\n<div style=\"background: #f4f8ff; border-radius: 8px; padding: 20px 22px; flex: 1; min-width: 200px; box-shadow: 0 4px 6px rgba(0,0,0,0.1); border-top: 3px solid #1a6b6b;\">\n<p><strong style=\"color: #1a3a6b; display: block; margin-bottom: 8px; font-size: 1.02rem;\">Sistema de canal caliente optimizado<\/strong><\/p>\n<p style=\"font-size: 0.95rem; color: #555; line-height: 1.7; margin: 0;\">El sistema de canal caliente para moldeo por inyecci\u00f3n est\u00e1 dise\u00f1ado para un flujo sin zonas muertas, lo que garantiza una m\u00ednima variaci\u00f3n en el peso en gramos en todas las cavidades. La precisi\u00f3n del control de temperatura de \u00b11 grado evita la degradaci\u00f3n de los materiales termosensibles y es esencial para una transparencia uniforme en los envases.<\/p>\n<\/div>\n<div style=\"background: #f4f8ff; border-radius: 8px; padding: 20px 22px; flex: 1; min-width: 200px; box-shadow: 0 4px 6px rgba(0,0,0,0.1); border-top: 3px solid #6b1a1a;\">\n<p><strong style=\"color: #1a3a6b; display: block; margin-bottom: 8px; font-size: 1.02rem;\">Dise\u00f1o especial de varilla de n\u00facleo<\/strong><\/p>\n<p style=\"font-size: 0.95rem; color: #555; line-height: 1.7; margin: 0;\">The mandrels (core rods) feature internal cooling channels that reduce core temperature between the injection and blow stations, accelerating the cooling phase. Fast-cycle mandrels enable the EP60 to achieve a 4 S dry cycle without sacrificing preform cooling uniformity or dimensional stability.<\/p>\n<\/div>\n<\/div>\n<p><img decoding=\"async\" style=\"width: 100%; max-width: 800px; height: auto; display: block; margin: 32px auto; border-radius: 8px; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\" src=\"https:\/\/isbmsystem.com\/wp-content\/uploads\/2026\/07\/Automaticlbm-Mould-Characteristics3.webp\" alt=\"EP60 IBM mould characteristics injection mould and blow mould components\" \/><\/p>\n<\/section>\n<p><!-- IBM vs EBM COMPARISON --><\/p>\n<section style=\"padding: 0 40px 48px; background: #f7f9fc;\">\n<h2 style=\"font-size: clamp(1.2rem,2.8vw,1.7rem); color: #0d2b52; padding-top: 40px; margin: 0 0 22px; border-bottom: 3px solid #1a6bbf; padding-bottom: 10px;\">Moldeo por inyecci\u00f3n-soplado frente a moldeo por extrusi\u00f3n-soplado: \u00bfPor qu\u00e9 IBM gana en el mercado de contenedores de precisi\u00f3n?<\/h2>\n<p style=\"font-size: clamp(0.95rem,2vw,1.1rem); color: #444; line-height: 1.85; margin: 0 0 20px;\">Buyers evaluating hollow container equipment often compare IBM and EBM on capital cost alone. The EP60 is more than a machine choice &#8211; it is a process choice that determines your long-term production economics and the quality ceiling your facility can achieve. The comparison below reflects real production differences that directly affect your cost per thousand bottles and your ability to win pharmaceutical and cosmetic supply contracts.<\/p>\n<div style=\"overflow-x: auto;\">\n<table style=\"width: 100%; border-collapse: collapse; font-size: clamp(0.85rem,1.8vw,1rem); min-width: 560px;\">\n<thead>\n<tr>\n<th style=\"background: #1a3a6b; color: #fff; padding: 11px 16px; border: 1px solid #2a4e8b; text-align: center; width: 6%;\">No.<\/th>\n<th style=\"background: #1a3a6b; color: #fff; padding: 11px 16px; border: 1px solid #2a4e8b; text-align: left;\">Elemento de comparaci\u00f3n<\/th>\n<th style=\"background: #1a6b3a; color: #fff; padding: 11px 16px; border: 1px solid #2a4e8b; text-align: left;\">Soplado por inyecci\u00f3n (IBM)<\/th>\n<th style=\"background: #6b3a1a; color: #fff; padding: 11px 16px; border: 1px solid #2a4e8b; text-align: left;\">Extrusi\u00f3n-soplado (EBM)<\/th>\n<\/tr>\n<\/thead>\n<tbody>\n<tr>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; text-align: center; color: #888; font-size: 0.9rem;\">1<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #333; font-weight: 600;\">Consistencia del peso de la botella<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #1a6b3a;\">Variaci\u00f3n de peso aproximada 1%<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #8a4a20;\">Variaci\u00f3n de peso aproximada 3%<\/td>\n<\/tr>\n<tr style=\"background: #f7f9fc;\">\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; text-align: center; color: #888; font-size: 0.9rem;\">2<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #333; font-weight: 600;\">Uniformidad del espesor de la pared<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #1a6b3a;\">Espesor de pared uniforme en toda la superficie<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #8a4a20;\">El espesor de la pared var\u00eda de 10 a 201 TP3T.<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; text-align: center; color: #888; font-size: 0.9rem;\">3<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #333; font-weight: 600;\">Cuello de botella \/ Rosca<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #1a6b3a;\">Sin destellos, sin raya en el cuello<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #8a4a20;\">Marca de corte, base y cuello debilitados.<\/td>\n<\/tr>\n<tr style=\"background: #f7f9fc;\">\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; text-align: center; color: #888; font-size: 0.9rem;\">4<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #333; font-weight: 600;\">Convexidad de la base<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #1a6b3a;\">Fuerte convexidad positiva, base estable<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #8a4a20;\">Convexidad d\u00e9bil debido a la soldadura por presi\u00f3n<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; text-align: center; color: #888; font-size: 0.9rem;\">5<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #333; font-weight: 600;\">Residuos de materiales<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #1a6b3a;\">Zero waste &#8211; no flash or scrap<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #8a4a20;\">20-40% de desecho de flasheo por presi\u00f3n<\/td>\n<\/tr>\n<tr style=\"background: #f7f9fc;\">\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; text-align: center; color: #888; font-size: 0.9rem;\">6<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #333; font-weight: 600;\">Capacidad de pared ultrafina<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #8a4a20;\">Menos adecuado para paredes muy delgadas<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #1a6b3a;\">El espesor de la pared es ajustable mediante un controlador.<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; text-align: center; color: #888; font-size: 0.9rem;\">7<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #333; font-weight: 600;\">Sensibilidad ambiental<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #1a6b3a;\">No es sensible a los cambios ambientales.<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #8a4a20;\">Se requiere ajuste frecuente<\/td>\n<\/tr>\n<tr style=\"background: #f7f9fc;\">\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; text-align: center; color: #888; font-size: 0.9rem;\">8<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #333; font-weight: 600;\">Recuento de cavidades y producci\u00f3n<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #1a6b3a;\">Alta cavitaci\u00f3n, alto rendimiento, boca plana<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #8a4a20;\">Menos cavidades, menor producci\u00f3n, cuello irregular<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; text-align: center; color: #888; font-size: 0.9rem;\">9<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #333; font-weight: 600;\">Vida \u00fatil y costo del moho<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #1a6b3a;\">Larga vida \u00fatil del molde, ideal para producciones de alto volumen continuas.<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #8a4a20;\">Menor vida \u00fatil del molde, menor coste inicial.<\/td>\n<\/tr>\n<tr style=\"background: #f7f9fc;\">\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; text-align: center; color: #888; font-size: 0.9rem;\">10<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #333; font-weight: 600;\">Huella<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #1a6b3a;\">Sistema integrado compacto, de tama\u00f1o reducido.<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #8a4a20;\">M\u00e1s equipamiento auxiliar, mayor superficie.<\/td>\n<\/tr>\n<tr>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; text-align: center; color: #888; font-size: 0.9rem;\">11<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #333; font-weight: 600;\">Contenedor ovalado<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #8a4a20;\">M\u00e1s dif\u00edcil formar formas ovaladas<\/td>\n<td style=\"padding: 9px 14px; border: 1px solid #dde3ee; color: #1a6b3a;\">M\u00e1s f\u00e1cil formar perfiles ovalados<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/section>\n<p><!-- APPLICATION FIELDS --><\/p>\n<section style=\"padding: 48px 40px; background: #fff;\">\n<h2 style=\"font-size: clamp(1.2rem,2.8vw,1.7rem); color: #0d2b52; margin: 0 0 20px; border-bottom: 3px solid #1a6bbf; padding-bottom: 10px;\">Application Fields and Container Types for the EP60<\/h2>\n<p style=\"font-size: clamp(0.95rem,2vw,1.1rem); color: #444; line-height: 1.85; margin: 0 0 20px;\">The EP60 is designed to produce bottles and containers from 1ml to the maximum volume for this model, covering the full range of primary packaging needs across four major market verticals. The table below shows the container types and industry segments where this <strong>equipo autom\u00e1tico de moldeo por inyecci\u00f3n-soplado<\/strong> ofrece su mayor rentabilidad comercial.<\/p>\n<div style=\"display: flex; flex-wrap: wrap; gap: 20px; margin-bottom: 32px;\">\n<div style=\"background: #eef7ff; border-radius: 10px; padding: 22px 24px; flex: 1; min-width: 220px; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\">\n<h3 style=\"color: #1a3a6b; font-size: 1.05rem; margin: 0 0 12px; border-bottom: 2px solid #4a90d9; padding-bottom: 8px;\">Industria farmac\u00e9utica<\/h3>\n<ul style=\"margin: 0; padding-left: 18px; color: #444; font-size: 0.95rem; line-height: 1.8;\">\n<li>Frascos para gotas oft\u00e1lmicas (LDPE, 5-30 ml)<\/li>\n<li>Frascos para comprimidos y c\u00e1psulas orales (HDPE, 30-500 ml)<\/li>\n<li>Aerosol nasal y frascos con dosificador (PP)<\/li>\n<li>Frascos de medicamentos l\u00edquidos con tapones de seguridad para ni\u00f1os.<\/li>\n<li>Viales para vacunas y reactivos (LDPE, 1-20 ml)<\/li>\n<li>Frascos para pastillas de HDPE \u00e1mbar y blanco con certificaci\u00f3n GMP<\/li>\n<\/ul>\n<\/div>\n<div style=\"background: #efffef; border-radius: 10px; padding: 22px 24px; flex: 1; min-width: 220px; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\">\n<h3 style=\"color: #1a3a6b; font-size: 1.05rem; margin: 0 0 12px; border-bottom: 2px solid #4ab870; padding-bottom: 8px;\">Industria cosm\u00e9tica<\/h3>\n<ul style=\"margin: 0; padding-left: 18px; color: #444; font-size: 0.95rem; line-height: 1.8;\">\n<li>Frascos aplicadores de desodorante roll-on (PE, 50-100 ml)<\/li>\n<li>Tubos y envases con aplicador de m\u00e1scara de pesta\u00f1as (PP, 5-20 ml)<\/li>\n<li>Frascos de esmalte de u\u00f1as (PS, 10-30 ml)<\/li>\n<li>Frascos con dosificador para lociones y s\u00e9rums (PCTG, 30-200 ml)<\/li>\n<li>Tarros de crema de boca ancha (PP\/PS)<\/li>\n<li>Frascos de base de maquillaje y t\u00f3nico<\/li>\n<\/ul>\n<\/div>\n<div style=\"background: #fffbee; border-radius: 10px; padding: 22px 24px; flex: 1; min-width: 220px; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\">\n<h3 style=\"color: #1a3a6b; font-size: 1.05rem; margin: 0 0 12px; border-bottom: 2px solid #d4a020; padding-bottom: 8px;\">Productos y alimentos para beb\u00e9s<\/h3>\n<ul style=\"margin: 0; padding-left: 18px; color: #444; font-size: 0.95rem; line-height: 1.8;\">\n<li>Biberones (PP, PPSU, 150-300 ml)<\/li>\n<li>Biberones dosificadores de f\u00f3rmula infantil<\/li>\n<li>Envases para miel y jarabe (LDPE)<\/li>\n<li>Envases para bebidas especiales de peque\u00f1o volumen<\/li>\n<li>Botellas de muestra de aceite comestible<\/li>\n<li>Envases para yogur y productos l\u00e1cteos<\/li>\n<\/ul>\n<\/div>\n<div style=\"background: #fff0f8; border-radius: 10px; padding: 22px 24px; flex: 1; min-width: 220px; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\">\n<h3 style=\"color: #1a3a6b; font-size: 1.05rem; margin: 0 0 12px; border-bottom: 2px solid #d44090; padding-bottom: 8px;\">Productos qu\u00edmicos e industriales diarios<\/h3>\n<ul style=\"margin: 0; padding-left: 18px; color: #444; font-size: 0.95rem; line-height: 1.8;\">\n<li>Botellas de champ\u00fa y acondicionador (HDPE\/PP)<\/li>\n<li>Dispensadores de gel desinfectante y loci\u00f3n para manos<\/li>\n<li>Botellas de muestra de fluidos automotrices<\/li>\n<li>Botellas de concentrado de productos qu\u00edmicos agr\u00edcolas<\/li>\n<li>envases de productos de limpieza<\/li>\n<li>Frascos industriales para reactivos con cuellos precisos.<\/li>\n<\/ul>\n<\/div>\n<\/div>\n<div style=\"display: flex; flex-wrap: wrap; gap: 16px; justify-content: center;\"><img decoding=\"async\" style=\"width: calc(50% - 8px); min-width: 180px; max-width: 300px; height: 200px; object-fit: cover; border-radius: 8px; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\" src=\"https:\/\/isbmsystem.com\/wp-content\/uploads\/2026\/07\/PP-bottle.webp\" alt=\"Pharmaceutical bottles produced by EVER POWER EP60 injection blow molding machine\" \/><br \/>\n<img decoding=\"async\" style=\"width: calc(50% - 8px); min-width: 180px; max-width: 300px; height: 200px; object-fit: cover; border-radius: 8px; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\" src=\"https:\/\/isbmsystem.com\/wp-content\/uploads\/2026\/07\/Wide-Mout-Jar.webp\" alt=\"Cosmetic bottles and jars from EP60 IBM machine\" \/><br \/>\n<img decoding=\"async\" style=\"width: calc(50% - 8px); min-width: 180px; max-width: 300px; height: 200px; object-fit: cover; border-radius: 8px; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\" src=\"https:\/\/isbmsystem.com\/wp-content\/uploads\/2026\/07\/Feeding-Bottle.webp\" alt=\"Eye drop and pharmaceutical bottles from EP60 automatic IBM equipment\" \/><br \/>\n<img decoding=\"async\" style=\"width: calc(50% - 8px); min-width: 180px; max-width: 300px; height: 200px; object-fit: cover; border-radius: 8px; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\" src=\"https:\/\/isbmsystem.com\/wp-content\/uploads\/2026\/07\/Application-for-Pharmacy-industry.webp\" alt=\"Daily chemical and cosmetic containers from EP60\" \/><\/div>\n<\/section>\n<p><!-- DIFFERENTIATED SECTION --><\/p>\n<section style=\"padding: 0 40px 0;\">\n<section style=\"background: #f0fff4; border-left: 4px solid #1a8c4e; padding: 28px 32px; margin: 40px 0; border-radius: 0 8px 8px 0;\">\n<h2 style=\"font-size: clamp(1.1rem,2.5vw,1.4rem); color: #111; margin: 0 0 16px;\">Bottle Neck Tolerance and Sealing Integrity: Why IBM Precision Matters<\/h2>\n<p style=\"font-size: clamp(0.95rem,2vw,1.1rem); color: #444; line-height: 1.8; margin: 0 0 14px;\">The defining commercial advantage of one-step injection blow molding over extrusion blow is dimensional control at the bottle neck and thread finish. On the EP60, the neck and thread geometry is formed in the injection station under controlled cavity pressure &#8211; never stretched, never trimmed. The result is that inner and outer neck diameter tolerances can be held within 0.1mm across an entire production run of millions of units.<\/p>\n<p style=\"font-size: clamp(0.95rem,2vw,1.1rem); color: #444; line-height: 1.8; margin: 0 0 14px;\">This matters profoundly for pharmaceutical packaging. Eye drop bottles, for example, must accept a calibrated dropper tip that delivers precisely 0.05ml per drop. A neck bore that varies by even 0.3mm causes the dropper to seat inconsistently, changing drop volume and potentially altering dosage. For aluminum foil induction-sealed pill bottles, the sealing flange must be flat and square to within tolerance for the foil to bond without micro-gaps &#8211; a condition the IBM process achieves consistently and EBM cannot guarantee without secondary trimming.<\/p>\n<p style=\"font-size: clamp(0.95rem,2vw,1.1rem); color: #444; line-height: 1.8; margin: 0 0 14px;\">In premium cosmetics, roll-on deodorant applicators, mascara tubes and nail polish bottles all require thread-to-cap engagement that prevents both leakage and cross-threading. The EP60 produces a thread finish so accurate that 100% cap-seal integrity can be achieved at the filling line without leak-testing overhead. This is why leading cosmetic contract manufacturers specify IBM when they cannot afford the shrinkage and callback cost of even 0.1% leakage in a high-end fragrance or serum container.<\/p>\n<div style=\"display: flex; flex-wrap: wrap; gap: 12px; margin-top: 18px;\">\n<div style=\"background: #fff; border: 1px solid #b2dfcc; border-radius: 6px; padding: 14px 18px; flex: 1; min-width: 200px;\"><strong style=\"color: #1a8c4e; display: block; margin-bottom: 6px;\">Neck Diameter Tolerance<\/strong><span style=\"color: #444; font-size: 0.97rem;\">Within 0.1mm inner and outer<\/span><\/div>\n<div style=\"background: #fff; border: 1px solid #b2dfcc; border-radius: 6px; padding: 14px 18px; flex: 1; min-width: 200px;\"><strong style=\"color: #1a8c4e; display: block; margin-bottom: 6px;\">Thread Seal Rate<\/strong><span style=\"color: #444; font-size: 0.97rem;\">100% cap-seal without deflashing<\/span><\/div>\n<div style=\"background: #fff; border: 1px solid #b2dfcc; border-radius: 6px; padding: 14px 18px; flex: 1; min-width: 200px;\"><strong style=\"color: #1a8c4e; display: block; margin-bottom: 6px;\">Flash at Neck\/Base<\/strong><span style=\"color: #444; font-size: 0.97rem;\">Zero &#8211; no parting line on bottle opening<\/span><\/div>\n<\/div>\n<\/section>\n<\/section>\n<p><!-- ROI AND PRODUCTION EFFICIENCY --><\/p>\n<section style=\"padding: 48px 40px; background: #f7f9fc;\">\n<h2 style=\"font-size: clamp(1.2rem,2.8vw,1.7rem); color: #0d2b52; margin: 0 0 20px; border-bottom: 3px solid #1a6bbf; padding-bottom: 10px;\">Investment Return and Production Efficiency Analysis: Why Choose the EP60?<\/h2>\n<p style=\"font-size: clamp(0.95rem,2vw,1.1rem); color: #444; line-height: 1.85; margin: 0 0 18px;\">The acquisition cost of the EP60 must be evaluated against five measurable efficiency drivers that determine cost per thousand bottles and payback period. Purchasing engineers who evaluate only machine price &#8211; without these five factors &#8211; systematically undervalue the IBM platform and overestimate EBM economics for their target application.<\/p>\n<div style=\"display: flex; flex-wrap: wrap; gap: 20px; margin-bottom: 24px;\">\n<div style=\"background: #fff; border-radius: 8px; padding: 20px 22px; flex: 1; min-width: 220px; box-shadow: 0 4px 6px rgba(0,0,0,0.1); border-left: 4px solid #1a6bbf;\">\n<p><strong style=\"color: #1a3a6b; display: block; margin-bottom: 8px;\">1. Residuos de cero destellos<\/strong><\/p>\n<p style=\"font-size: 0.95rem; color: #555; line-height: 1.7; margin: 0;\">IBM no produce rebabas ni desperdicios en la l\u00ednea de producci\u00f3n. EBM genera entre 20 y 401 toneladas de peso de botella como desperdicio por ciclo. Con 200 toneladas de PP al a\u00f1o, IBM, al no generar desperdicios, ahorra entre 40 y 80 toneladas de resina anualmente. A 1500 USD por tonelada, esto representa un ahorro de entre 60\u00a0000 y 120\u00a0000 USD en materia prima al a\u00f1o con una sola m\u00e1quina.<\/p>\n<\/div>\n<div style=\"background: #fff; border-radius: 8px; padding: 20px 22px; flex: 1; min-width: 220px; box-shadow: 0 4px 6px rgba(0,0,0,0.1); border-left: 4px solid #0e8a3e;\">\n<p><strong style=\"color: #1a3a6b; display: block; margin-bottom: 8px;\">2. Sin mano de obra para desbarbar<\/strong><\/p>\n<p style=\"font-size: 0.95rem; color: #555; line-height: 1.7; margin: 0;\">EBM requires a secondary deflashing operation &#8211; either inline mechanical or manual &#8211; adding labor cost, a second machine footprint, and an additional quality failure point. IBM bottles from the EP60 come off the conveyor with zero post-processing required before filling or labeling, saving 1-3 operators per shift.<\/p>\n<\/div>\n<div style=\"background: #fff; border-radius: 8px; padding: 20px 22px; flex: 1; min-width: 220px; box-shadow: 0 4px 6px rgba(0,0,0,0.1); border-left: 4px solid #b07000;\">\n<p><strong style=\"color: #1a3a6b; display: block; margin-bottom: 8px;\">3. Rendimiento del ciclo de secado corto<\/strong><\/p>\n<p style=\"font-size: 0.95rem; color: #555; line-height: 1.7; margin: 0;\">The EP60 achieves a 4 S dry cycle. With 10 cavities at 60ml, annual output at 6,000 hours run time exceeds 54.0 million bottles. This throughput concentration into a single compact machine reduces total asset investment per unit of capacity versus multi-machine EBM lines at equivalent output.<\/p>\n<\/div>\n<div style=\"background: #fff; border-radius: 8px; padding: 20px 22px; flex: 1; min-width: 220px; box-shadow: 0 4px 6px rgba(0,0,0,0.1); border-left: 4px solid #8a1a6b;\">\n<p><strong style=\"color: #1a3a6b; display: block; margin-bottom: 8px;\">4. Cambio r\u00e1pido de molde<\/strong><\/p>\n<p style=\"font-size: 0.95rem; color: #555; line-height: 1.7; margin: 0;\">The injection mold and blow mold on the EP60 can be changed in 2-4 hours by a trained two-person team. Recipe recall from the PLC removes setup time entirely for repeat jobs. Facilities running 8-15 SKUs on a single EP60 achieve mold changeover frequency of 2-4 per week with total changeover downtime below 10% of available production hours.<\/p>\n<\/div>\n<\/div>\n<div style=\"background: #eef6ff; border-radius: 10px; padding: 24px 28px; border: 1px solid #b8d4f0;\">\n<h3 style=\"color: #1a3a6b; font-size: 1.1rem; margin: 0 0 12px;\">Huella y eficiencia energ\u00e9tica<\/h3>\n<p style=\"font-size: 0.97rem; color: #444; line-height: 1.78; margin: 0 0 10px;\">The EP60 footprint of 3.8&#215;1.4&#215;1.8 M consolidates injection, blow and ejection into a single machine envelope. Compare this to a two-machine EBM line (extruder plus blow machine, plus deflash press, plus conveyor) which typically occupies 3-4 times the floor area for equivalent throughput. Utility connections &#8211; compressed air at 0.7-1.2 MPa, cooling water at 4 M3\/h flow, electrical connection at 37 KW total &#8211; are all single-point utilities, reducing installation complexity and ongoing maintenance overhead.<\/p>\n<p style=\"font-size: 0.97rem; color: #444; line-height: 1.78; margin: 0;\">Factory building cost in pharmaceutical-grade cleanroom environments can reach 2,000-5,000 USD per square meter. The compact footprint of the EP60 directly reduces the cleanroom area required to produce a given volume of output &#8211; a capital benefit that does not appear in machine comparison tables but materially affects total project economics.<\/p>\n<\/div>\n<\/section>\n<p><!-- MOULD CHARACTERISTICS --><\/p>\n<section style=\"padding: 48px 40px; background: #fff;\">\n<h2 style=\"font-size: clamp(1.2rem,2.8vw,1.7rem); color: #0d2b52; margin: 0 0 20px; border-bottom: 3px solid #1a6bbf; padding-bottom: 10px;\">Caracter\u00edsticas y est\u00e1ndares de dise\u00f1o de moldes de la serie EP de IBM<\/h2>\n<div style=\"display: flex; flex-wrap: wrap; gap: 20px; margin-bottom: 28px; align-items: flex-start;\">\n<div style=\"flex: 1; min-width: 260px;\">\n<ul style=\"margin: 0; padding: 0; list-style: none;\">\n<li style=\"padding: 11px 0; border-bottom: 1px solid #e0e8f4; display: flex; gap: 12px; align-items: flex-start;\"><span style=\"color: #1a6bbf; font-size: 1.1rem; flex-shrink: 0;\">\u25a0<\/span><span style=\"font-size: 0.97rem; color: #444; line-height: 1.7;\"><strong>Dise\u00f1o de cavidad activa y bloque de cuello<\/strong> &#8211; injection mold cavities and neck blocks are independently adjustable, allowing preform tube body dimensions to be fine-tuned without replacing the entire mold set. Oil and water passages are purpose-designed for stable temperature distribution and easy disassembly.<\/span><\/li>\n<li style=\"padding: 11px 0; border-bottom: 1px solid #e0e8f4; display: flex; gap: 12px; align-items: flex-start;\"><span style=\"color: #1a6bbf; font-size: 1.1rem; flex-shrink: 0;\">\u25a0<\/span><span style=\"font-size: 0.97rem; color: #444; line-height: 1.7;\"><strong>Grados de acero de primera calidad<\/strong> &#8211; injection mold bodies use 4Cr13 stainless steel or imported high-strength S136 alloy steel. S136 is a mirror-polish, corrosion-resistant steel with through-hardness to 52 HRC. Blow mold bodies can be manufactured in magnesium-aluminum alloy for superior thermal conductivity and reduced inertia mass on the rotary turret.<\/span><\/li>\n<li style=\"padding: 11px 0; border-bottom: 1px solid #e0e8f4; display: flex; gap: 12px; align-items: flex-start;\"><span style=\"color: #1a6bbf; font-size: 1.1rem; flex-shrink: 0;\">\u25a0<\/span><span style=\"font-size: 0.97rem; color: #444; line-height: 1.7;\"><strong>Dise\u00f1o optimizado de canal caliente y preforma<\/strong> &#8211; the hot runner manifold is engineered to minimize gram weight deviation across all cavities and to reduce wall thickness variation in the preform body. The mandrel design ensures uniform air delivery for consistent blow expansion and fast cooling.<\/span><\/li>\n<li style=\"padding: 11px 0; border-bottom: 1px solid #e0e8f4; display: flex; gap: 12px; align-items: flex-start;\"><span style=\"color: #1a6bbf; font-size: 1.1rem; flex-shrink: 0;\">\u25a0<\/span><span style=\"font-size: 0.97rem; color: #444; line-height: 1.7;\"><strong>Dimensiones precisas de la rosca del cuello y del sello<\/strong> &#8211; bottle mouth inner and outer diameters, thread pitch and flange geometry are machined to drawing tolerance. Cap sealing rate is 100% across production-run samples.<\/span><\/li>\n<li style=\"padding: 11px 0; border-bottom: 1px solid #e0e8f4; display: flex; gap: 12px; align-items: flex-start;\"><span style=\"color: #1a6bbf; font-size: 1.1rem; flex-shrink: 0;\">\u25a0<\/span><span style=\"font-size: 0.97rem; color: #444; line-height: 1.7;\"><strong>Sin destellos en el cuello ni en la base.<\/strong> &#8211; the IBM process geometry eliminates parting-line flash at the bottle mouth and pinch-weld flash at the base. Bottles exit the EP60 with no trimming required at either end.<\/span><\/li>\n<li style=\"padding: 11px 0; display: flex; gap: 12px; align-items: flex-start;\"><span style=\"color: #1a6bbf; font-size: 1.1rem; flex-shrink: 0;\">\u25a0<\/span><span style=\"font-size: 0.97rem; color: #444; line-height: 1.7;\"><strong>M\u00e9tricas de consistencia del producto<\/strong> &#8211; size, weight, parting line position and wall thickness are consistent across all cavities and across production batches, enabling pharmaceutical clients to validate production on a per-batch statistical basis without 100% inspection overhead.<\/span><\/li>\n<\/ul>\n<\/div>\n<div style=\"flex: 1; min-width: 240px; display: flex; flex-direction: column; gap: 16px;\"><img decoding=\"async\" style=\"width: 100%; height: auto; border-radius: 8px; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\" src=\"https:\/\/isbmsystem.com\/wp-content\/uploads\/2026\/07\/Automaticlbm-Mould-Characteristics4.webp\" alt=\"Detalle del molde de la serie EP de IBM: varillas de n\u00facleo, mandriles y cavidad del molde de soplado.\" \/><\/div>\n<\/div>\n<\/section>\n<p><!-- EQUIPMENT SELECTION GUIDE --><\/p>\n<section style=\"padding: 48px 40px; background: #0d2b52; color: #fff;\">\n<h2 style=\"font-size: clamp(1.2rem,2.8vw,1.7rem); color: #ffcf40; margin: 0 0 20px; border-bottom: 2px solid rgba(255,207,64,0.3); padding-bottom: 10px;\">Equipment Selection Guide: Is the EP60 Right for Your Production Requirements?<\/h2>\n<p style=\"font-size: clamp(0.95rem,2vw,1.1rem); color: #b8d4f4; line-height: 1.85; margin: 0 0 20px;\">Selecting the correct IBM tonnage requires calculating the intersection of three variables: preform weight, required cavity count, and target output per hour. Use this framework to confirm whether the EP60 is correctly sized for your application, or to understand what production parameters it can support.<\/p>\n<div style=\"display: flex; flex-wrap: wrap; gap: 20px; margin-bottom: 28px;\">\n<div style=\"background: rgba(255,255,255,0.07); border-radius: 8px; padding: 22px 24px; flex: 1; min-width: 240px; border: 1px solid rgba(255,255,255,0.12);\">\n<h3 style=\"color: #ffcf40; font-size: 1.05rem; margin: 0 0 12px;\">Paso 1: Calcular el peso de la preforma<\/h3>\n<p style=\"font-size: 0.95rem; color: #c0d8f0; line-height: 1.75; margin: 0;\">Take the target bottle weight in grams (including the neck, body and base). Add 2-5% for process cushion. The EP60 injection weight of 260\/383 g must be equal to or greater than (target preform weight x number of cavities). For example: a 5g preform at 8 cavities requires 40g shot weight, well within the 260\/383 g capacity.<\/p>\n<\/div>\n<div style=\"background: rgba(255,255,255,0.07); border-radius: 8px; padding: 22px 24px; flex: 1; min-width: 240px; border: 1px solid rgba(255,255,255,0.12);\">\n<h3 style=\"color: #ffcf40; font-size: 1.05rem; margin: 0 0 12px;\">Paso 2: Calcular el n\u00famero de cavidades necesarias.<\/h3>\n<p style=\"font-size: 0.95rem; color: #c0d8f0; line-height: 1.75; margin: 0;\">Target output (bottles\/hour) divided by (3600 seconds \/ cycle time in seconds) gives required cavities. At a 4 S cycle and 10,000 bottles per hour target: 10,000 \/ (3600 \/ 4) = 12 cavities minimum. Cross-check against the cavity table above to confirm the EP60 can deliver this at your bottle volume.<\/p>\n<\/div>\n<div style=\"background: rgba(255,255,255,0.07); border-radius: 8px; padding: 22px 24px; flex: 1; min-width: 240px; border: 1px solid rgba(255,255,255,0.12);\">\n<h3 style=\"color: #ffcf40; font-size: 1.05rem; margin: 0 0 12px;\">Paso 3: Verificar el ajuste de la platina del molde<\/h3>\n<p style=\"font-size: 0.95rem; color: #c0d8f0; line-height: 1.75; margin: 0;\">The injection mould layout (cavity array footprint) must fit within the EP60 max platen size of 600&#215;390 mm. Wide-bottle (diameter greater than 120mm) or tall-bottle (height greater than 220mm) applications exceed the EP60 mould envelope and require a larger model. Confirm your bottle OD and height before specifying cavity count.<\/p>\n<\/div>\n<div style=\"background: rgba(255,255,255,0.07); border-radius: 8px; padding: 22px 24px; flex: 1; min-width: 240px; border: 1px solid rgba(255,255,255,0.12);\">\n<h3 style=\"color: #ffcf40; font-size: 1.05rem; margin: 0 0 12px;\">Paso 4: Material y presi\u00f3n de inyecci\u00f3n<\/h3>\n<p style=\"font-size: 0.95rem; color: #c0d8f0; line-height: 1.75; margin: 0;\">PP requires higher injection pressure and melt temperature than LDPE. PC and PETG require even higher barrel temperatures and longer residence-time plasticization. The EP60 hydraulic system pressure of 14 MPa and motor of 18.5\/22 KW supports the injection forces needed for PP and engineering grade materials at the rated injection weight. Confirm your resin specification with the EVER POWER application team before ordering.<\/p>\n<\/div>\n<\/div>\n<p style=\"font-size: 0.97rem; color: #90b8e8; line-height: 1.75; margin: 0;\">EVER POWER application engineers provide free pre-sales technical consultation to validate your container dimensions, material, cavity count and production target against EP60 specifications. Contact us with your bottle drawing and production brief for a written confirmation of suitability.<\/p>\n<\/section>\n<p><!-- MACHINE MAINTENANCE AND STRUCTURE --><\/p>\n<section style=\"padding: 48px 40px; background: #fff;\">\n<h2 style=\"font-size: clamp(1.2rem,2.8vw,1.7rem); color: #0d2b52; margin: 0 0 20px; border-bottom: 3px solid #1a6bbf; padding-bottom: 10px;\">Descripci\u00f3n general de la estructura de la m\u00e1quina y directrices de mantenimiento.<\/h2>\n<p style=\"font-size: clamp(0.95rem,2vw,1.1rem); color: #444; line-height: 1.85; margin: 0 0 20px;\">The EP60 is built around three core functional modules. Understanding their maintenance requirements is essential for sustaining the machine performance metrics &#8211; dry cycle, output rate, and product quality &#8211; over the full production life of the equipment.<\/p>\n<details style=\"background: #f4f8ff; border-radius: 8px; border: 1px solid #c8dcf4; margin-bottom: 14px;\">\n<summary style=\"padding: 16px 20px; cursor: pointer; font-weight: bold; color: #1a3a6b; font-size: 1.02rem; list-style: none;\">Module 1 &#8211; Injection Unit: Screw, Barrel, Hot Runner<\/summary>\n<div style=\"padding: 4px 20px 20px;\">\n<p style=\"font-size: 0.96rem; color: #444; line-height: 1.78; margin: 12px 0;\">La unidad de inyecci\u00f3n funde y dosifica el pl\u00e1stico en la cavidad de la preforma. Mantenimiento diario: compruebe los perfiles de temperatura del cilindro con respecto a los puntos de ajuste, inspeccione la punta del husillo y el anillo de retenci\u00f3n para detectar indicadores de desgaste y verifique que las temperaturas de la zona del canal caliente est\u00e9n dentro de los 2 grados de los puntos de ajuste antes de la puesta en marcha. Semanalmente: inspeccione las bandas de aislamiento del cilindro, compruebe los sellos del cilindro de inyecci\u00f3n para detectar fugas de aceite y purgue cualquier contaminaci\u00f3n de color de la producci\u00f3n anterior. Mensualmente: extraiga y limpie el anillo de retenci\u00f3n y el conjunto de la punta del husillo; inspeccione las aletas del husillo para detectar desgaste y mida el di\u00e1metro del orificio del cilindro para comprobar la holgura. Reemplace el cilindro si la holgura excede la tolerancia del fabricante para evitar el desbordamiento de la masa fundida y la inconsistencia en el peso de la inyecci\u00f3n.<\/p>\n<p style=\"font-size: 0.96rem; color: #444; line-height: 1.78; margin: 0;\">Purging procedure: when changing from dark to light colors or from engineering resin to commodity resin, use a commercial purging compound at a barrel temperature 10 degrees above the new material set point. Run 5-10 purge shots before switching to the new material. Never leave the barrel idle at processing temperature for more than 20 minutes without purging &#8211; thermal degradation during idle periods is the primary cause of black speck contamination on restart.<\/p>\n<\/div>\n<\/details>\n<details style=\"background: #f4f8ff; border-radius: 8px; border: 1px solid #c8dcf4; margin-bottom: 14px;\">\n<summary style=\"padding: 16px 20px; cursor: pointer; font-weight: bold; color: #1a3a6b; font-size: 1.02rem; list-style: none;\">Module 2 &#8211; Clamping and Rotary Indexing Unit<\/summary>\n<div style=\"padding: 4px 20px 20px;\">\n<p style=\"font-size: 0.96rem; color: #444; line-height: 1.78; margin: 12px 0;\">The clamping system and rotary indexer carry the highest mechanical loads and have the most precise positional requirements. Daily: apply grease to tie-bar surfaces and rotary table guide rails per the lubrication schedule (EVER POWER specifies the grease grade &#8211; do not substitute with general-purpose grease, which may not maintain viscosity at operating temperature). Inspect hydraulic clamping cylinder for oil seepage at rod seal. Listen for unusual sounds during the indexing rotation &#8211; any metallic click or hesitation indicates an angular divider bearing requiring inspection.<\/p>\n<p style=\"font-size: 0.96rem; color: #444; line-height: 1.78; margin: 0;\">Mensualmente: compruebe el paralelismo del plato con un comparador de cuadrante en cuatro posiciones de la barra de uni\u00f3n; una desviaci\u00f3n superior a 0,05 mm requiere un nuevo ajuste. Compruebe la precisi\u00f3n de la posici\u00f3n de indexaci\u00f3n colocando un comparador de cuadrante contra una superficie de referencia en la torreta y verificando que la misma posici\u00f3n se repita con una precisi\u00f3n de 0,02 mm despu\u00e9s de 100 ciclos de indexaci\u00f3n consecutivos. Si se observa alguna desviaci\u00f3n, ajuste el tope mec\u00e1nico o p\u00f3ngase en contacto con el servicio t\u00e9cnico de EVER POWER.<\/p>\n<\/div>\n<\/details>\n<details style=\"background: #f4f8ff; border-radius: 8px; border: 1px solid #c8dcf4; margin-bottom: 14px;\">\n<summary style=\"padding: 16px 20px; cursor: pointer; font-weight: bold; color: #1a3a6b; font-size: 1.02rem; list-style: none;\">Module 3 &#8211; Hydraulic System and Cooling Circuit<\/summary>\n<div style=\"padding: 4px 20px 20px;\">\n<p style=\"font-size: 0.96rem; color: #444; line-height: 1.78; margin: 12px 0;\">The hydraulic system is the energy backbone of the EP60. System pressure is set at 14 MPa. Daily: check hydraulic oil level in the tank sight glass, check oil temperature display (normal operating range 40-55 degrees Celsius; above 60 degrees indicates a cooling circuit problem or filter blockage), and inspect all visible hydraulic hose fittings for weeping. The oil filter indicator must be checked every 250 hours &#8211; a red indicator requires immediate filter element replacement, not deferral.<\/p>\n<p style=\"font-size: 0.96rem; color: #444; line-height: 1.78; margin: 0;\">Cooling circuit: the EP60 requires clean, scale-free cooling water at 0.3-0.4 MPa pressure and 4 M3\/h flow. Install a water treatment system upstream of the machine to prevent calcium scale buildup inside mold cooling channels. Scale buildup of just 1mm in a 6mm channel reduces cooling efficiency by over 30%, extending cycle times and reducing output. Flush cooling circuits with a descaling solution annually. Chiller water quality must be neutral pH (6.5-7.5) and contain an anti-corrosion inhibitor compatible with copper and aluminum alloy mold materials.<\/p>\n<\/div>\n<\/details>\n<\/section>\n<p><!-- TURNKEY AND CUSTOMIZATION --><\/p>\n<section style=\"padding: 48px 40px; background: #f0f7ff;\">\n<h2 style=\"font-size: clamp(1.2rem,2.8vw,1.7rem); color: #0d2b52; margin: 0 0 20px; border-bottom: 3px solid #1a6bbf; padding-bottom: 10px;\">Soluciones llave en mano y servicios de personalizaci\u00f3n de EVER POWER<\/h2>\n<p style=\"font-size: clamp(0.95rem,2vw,1.1rem); color: #444; line-height: 1.85; margin: 0 0 20px;\">EVER POWER supplies the EP60 as either a standalone machine or as the centerpiece of a complete turnkey bottle production line. For customers setting up a new facility or expanding into a new container product line, the turnkey approach eliminates the integration risk that comes from sourcing the IBM machine, molds, auxiliaries, and downstream equipment from separate vendors.<\/p>\n<div style=\"display: flex; flex-wrap: wrap; gap: 20px; margin-bottom: 28px;\">\n<div style=\"background: #fff; border-radius: 8px; padding: 20px 22px; flex: 1; min-width: 220px; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\">\n<p><strong style=\"color: #1a3a6b; display: block; margin-bottom: 8px;\">Dise\u00f1o y fabricaci\u00f3n de moldes<\/strong><\/p>\n<p style=\"font-size: 0.95rem; color: #555; line-height: 1.7; margin: 0;\">Los ingenieros de EVER POWER desarrollan conjuntos de moldes de inyecci\u00f3n y soplado a partir de planos de botellas o archivos 3D del cliente. Moldes de canal caliente multicavidad en acero S136 o 4Cr13. Prototipos de moldes de una sola cavidad para la validaci\u00f3n del envase antes de la producci\u00f3n de moldes de alta cavidad. Pruebas de moldes T0 realizadas en f\u00e1brica antes del env\u00edo.<\/p>\n<\/div>\n<div style=\"background: #fff; border-radius: 8px; padding: 20px 22px; flex: 1; min-width: 220px; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\">\n<p><strong style=\"color: #1a3a6b; display: block; margin-bottom: 8px;\">Integraci\u00f3n de equipos auxiliares<\/strong><\/p>\n<p style=\"font-size: 0.95rem; color: #555; line-height: 1.7; margin: 0;\">The EVER POWER turnkey line includes: screw air compressor, air tank and air dryer, mold temperature controller, industrial chiller, auto loader, conveyor belt, screen printing and labeling system, washing and drying line, and automatic filling and capping machines. All auxiliary equipment is specified and pre-integrated to match the EP60 output rate.<\/p>\n<\/div>\n<div style=\"background: #fff; border-radius: 8px; padding: 20px 22px; flex: 1; min-width: 220px; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\">\n<p><strong style=\"color: #1a3a6b; display: block; margin-bottom: 8px;\">Sistemas de calidad posteriores<\/strong><\/p>\n<p style=\"font-size: 0.95rem; color: #555; line-height: 1.7; margin: 0;\">Optional inline bottle visual inspection machine (machine vision system for flash, deformation and contamination detection), automatic leak tester, automatic packing machine, and carton erector. For pharmaceutical lines, 100% inline leak testing and vision inspection are available as integrated modules matched to the EP60 conveyor output speed.<\/p>\n<\/div>\n<div style=\"background: #fff; border-radius: 8px; padding: 20px 22px; flex: 1; min-width: 220px; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\">\n<p><strong style=\"color: #1a3a6b; display: block; margin-bottom: 8px;\">Configuraci\u00f3n de salas limpias y GMP<\/strong><\/p>\n<p style=\"font-size: 0.95rem; color: #555; line-height: 1.7; margin: 0;\">Para clientes farmac\u00e9uticos que requieren producci\u00f3n con certificaci\u00f3n GMP, EVER POWER ofrece personalizaci\u00f3n de m\u00e1quinas que incluye: lubricaci\u00f3n de sistema cerrado para evitar la contaminaci\u00f3n de la zona de producto, carcasas de seguridad de acero inoxidable, carcasa de m\u00e1quina con filtro HEPA para compatibilidad con salas blancas de clase 100 000 y asistencia en la documentaci\u00f3n para los protocolos de cualificaci\u00f3n de equipos (IQ\/OQ\/PQ).<\/p>\n<\/div>\n<\/div>\n<p><img decoding=\"async\" style=\"width: 100%; max-width: 860px; height: auto; display: block; margin: 0 auto; border-radius: 8px; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\" src=\"https:\/\/isbmsystem.com\/wp-content\/uploads\/2026\/07\/Production-Line-Components.webp\" alt=\"Componentes de la l\u00ednea de producci\u00f3n de moldeo por inyecci\u00f3n-soplado de EVER POWER: embalaje de la cinta transportadora del enfriador del compresor\" \/><\/p>\n<\/section>\n<p><!-- AUXILIARY EQUIPMENT --><\/p>\n<section style=\"padding: 48px 40px; background: #fff;\">\n<h2 style=\"font-size: clamp(1.2rem,2.8vw,1.7rem); color: #0d2b52; margin: 0 0 20px; border-bottom: 3px solid #1a6bbf; padding-bottom: 10px;\">Auxiliary Equipment Available with the EP60<\/h2>\n<p><img decoding=\"async\" style=\"width: 100%; max-width: 860px; height: auto; display: block; margin: 0 auto 28px; border-radius: 8px; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\" src=\"https:\/\/isbmsystem.com\/wp-content\/uploads\/2026\/07\/Auxiliary-Equipment-2.webp\" alt=\"Equipos auxiliares para la l\u00ednea de producci\u00f3n de IBM: controlador de temperatura del molde, compresor de refrigeraci\u00f3n, cargador autom\u00e1tico, m\u00e1quina de embalaje.\" \/><\/p>\n<div style=\"display: flex; flex-wrap: wrap; gap: 14px; justify-content: center;\">\n<div style=\"background: #f4f8ff; border-radius: 6px; padding: 12px 18px; font-size: 0.93rem; color: #1a3a6b; border: 1px solid #c8dcf4;\">Compresor de aire de tornillo<\/div>\n<div style=\"background: #f4f8ff; border-radius: 6px; padding: 12px 18px; font-size: 0.93rem; color: #1a3a6b; border: 1px solid #c8dcf4;\">Compresor de aire de pist\u00f3n<\/div>\n<div style=\"background: #f4f8ff; border-radius: 6px; padding: 12px 18px; font-size: 0.93rem; color: #1a3a6b; border: 1px solid #c8dcf4;\">Tanque de aire<\/div>\n<div style=\"background: #f4f8ff; border-radius: 6px; padding: 12px 18px; font-size: 0.93rem; color: #1a3a6b; border: 1px solid #c8dcf4;\">Secador de aire fr\u00edo<\/div>\n<div style=\"background: #f4f8ff; border-radius: 6px; padding: 12px 18px; font-size: 0.93rem; color: #1a3a6b; border: 1px solid #c8dcf4;\">Controlador de temperatura del molde<\/div>\n<div style=\"background: #f4f8ff; border-radius: 6px; padding: 12px 18px; font-size: 0.93rem; color: #1a3a6b; border: 1px solid #c8dcf4;\">Enfriador industrial (opcional)<\/div>\n<div style=\"background: #f4f8ff; border-radius: 6px; padding: 12px 18px; font-size: 0.93rem; color: #1a3a6b; border: 1px solid #c8dcf4;\">Cinta transportadora<\/div>\n<div style=\"background: #f4f8ff; border-radius: 6px; padding: 12px 18px; font-size: 0.93rem; color: #1a3a6b; border: 1px solid #c8dcf4;\">Cargador autom\u00e1tico (opcional)<\/div>\n<div style=\"background: #f4f8ff; border-radius: 6px; padding: 12px 18px; font-size: 0.93rem; color: #1a3a6b; border: 1px solid #c8dcf4;\">Mezclador<\/div>\n<div style=\"background: #f4f8ff; border-radius: 6px; padding: 12px 18px; font-size: 0.93rem; color: #1a3a6b; border: 1px solid #c8dcf4;\">Trituradora<\/div>\n<div style=\"background: #f4f8ff; border-radius: 6px; padding: 12px 18px; font-size: 0.93rem; color: #1a3a6b; border: 1px solid #c8dcf4;\">M\u00e1quina de inspecci\u00f3n visual de botellas<\/div>\n<div style=\"background: #f4f8ff; border-radius: 6px; padding: 12px 18px; font-size: 0.93rem; color: #1a3a6b; border: 1px solid #c8dcf4;\">M\u00e1quina de embalaje<\/div>\n<\/div>\n<\/section>\n<p><!-- QUALITY CONTROL --><\/p>\n<section style=\"padding: 48px 40px; background: #f7f9fc;\">\n<h2 style=\"font-size: clamp(1.2rem,2.8vw,1.7rem); color: #0d2b52; margin: 0 0 20px; border-bottom: 3px solid #1a6bbf; padding-bottom: 10px;\">Control de calidad y normas de fabricaci\u00f3n<\/h2>\n<div style=\"display: flex; flex-wrap: wrap; gap: 18px; margin-bottom: 24px;\">\n<div style=\"background: #fff; border-radius: 8px; padding: 20px 22px; flex: 1; min-width: 200px; box-shadow: 0 4px 6px rgba(0,0,0,0.1); border-top: 4px solid #1a6bbf;\">\n<p><strong style=\"color: #1a3a6b; display: block; margin-bottom: 8px;\">Mecanizado CNC de componentes cr\u00edticos<\/strong><\/p>\n<p style=\"font-size: 0.95rem; color: #555; line-height: 1.7; margin: 0;\">La bancada, las placas de sujeci\u00f3n y todas las superficies de precisi\u00f3n se mecanizan mediante CNC en una sola operaci\u00f3n para garantizar la exactitud geom\u00e9trica. El paralelismo de las placas se verifica mediante medici\u00f3n l\u00e1ser con una precisi\u00f3n de 0,02 mm. Los orificios de las barras de acoplamiento se rectifican con una tolerancia H7 para un ajuste perfecto de los rodamientos.<\/p>\n<\/div>\n<div style=\"background: #fff; border-radius: 8px; padding: 20px 22px; flex: 1; min-width: 200px; box-shadow: 0 4px 6px rgba(0,0,0,0.1); border-top: 4px solid #0e8a3e;\">\n<p><strong style=\"color: #1a3a6b; display: block; margin-bottom: 8px;\">Endurecimiento por inducci\u00f3n de la barra de uni\u00f3n<\/strong><\/p>\n<p style=\"font-size: 0.95rem; color: #555; line-height: 1.7; margin: 0;\">Las barras de uni\u00f3n se someten a un endurecimiento por inducci\u00f3n de alta frecuencia hasta alcanzar una dureza superficial de 52-58 HRC, seguido de un rectificado de precisi\u00f3n. Este tratamiento superficial proporciona resistencia al desgaste frente al contacto deslizante repetido de las placas de sujeci\u00f3n durante millones de ciclos, sin que se produzcan rozaduras ni desgaste por fricci\u00f3n.<\/p>\n<\/div>\n<div style=\"background: #fff; border-radius: 8px; padding: 20px 22px; flex: 1; min-width: 200px; box-shadow: 0 4px 6px rgba(0,0,0,0.1); border-top: 4px solid #b07000;\">\n<p><strong style=\"color: #1a3a6b; display: block; margin-bottom: 8px;\">Limpieza del circuito hidr\u00e1ulico<\/strong><\/p>\n<p style=\"font-size: 0.95rem; color: #555; line-height: 1.7; margin: 0;\">Todos los circuitos hidr\u00e1ulicos se purgan, se someten a pruebas de presi\u00f3n y se verifica el recuento de part\u00edculas antes del montaje. La limpieza del aceite hidr\u00e1ulico se mantiene como m\u00ednimo en la clase 17\/15\/12 de la norma ISO 4406. La sensibilidad a la contaminaci\u00f3n de las v\u00e1lvulas proporcionales y servov\u00e1lvulas exige este nivel de limpieza para evitar el atascamiento del carrete de la v\u00e1lvula y la deriva del control.<\/p>\n<\/div>\n<div style=\"background: #fff; border-radius: 8px; padding: 20px 22px; flex: 1; min-width: 200px; box-shadow: 0 4px 6px rgba(0,0,0,0.1); border-top: 4px solid #8a1a6b;\">\n<p><strong style=\"color: #1a3a6b; display: block; margin-bottom: 8px;\">Prueba de rodaje en f\u00e1brica de 72 horas<\/strong><\/p>\n<p style=\"font-size: 0.95rem; color: #555; line-height: 1.7; margin: 0;\">Every EP60 undergoes a minimum 72-hour continuous loaded run test at the factory before shipment. During this period, production output samples are measured for weight consistency, wall thickness uniformity, and dimensional accuracy. Any parameter outside specification triggers a hold and corrective action before the machine is cleared for delivery.<\/p>\n<\/div>\n<div style=\"background: #fff; border-radius: 8px; padding: 20px 22px; flex: 1; min-width: 200px; box-shadow: 0 4px 6px rgba(0,0,0,0.1); border-top: 4px solid #1a6b6b;\">\n<p><strong style=\"color: #1a3a6b; display: block; margin-bottom: 8px;\">Cumplimiento de la normativa de seguridad CE<\/strong><\/p>\n<p style=\"font-size: 0.95rem; color: #555; line-height: 1.7; margin: 0;\">The EP60 is CE-marked in compliance with EU Machinery Directive requirements. Safety features include: interlocked safety doors with hydraulic circuit interrupt, light curtain protection at the operator access zone, emergency stop at all operator positions, and two-hand operator control for manual mold setting. CE documentation is provided with every machine.<\/p>\n<\/div>\n<\/div>\n<\/section>\n<p><!-- AFTER-SALES SERVICE --><\/p>\n<section style=\"padding: 48px 40px; background: #fff;\">\n<h2 style=\"font-size: clamp(1.2rem,2.8vw,1.7rem); color: #0d2b52; margin: 0 0 20px; border-bottom: 3px solid #1a6bbf; padding-bottom: 10px;\">Servicio posventa y soporte t\u00e9cnico<\/h2>\n<div style=\"display: flex; flex-wrap: wrap; gap: 18px;\">\n<div style=\"background: #eef7ff; border-radius: 8px; padding: 20px 22px; flex: 1; min-width: 220px; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\">\n<p><strong style=\"color: #1a3a6b; display: block; margin-bottom: 8px; font-size: 1.02rem;\">Instalaci\u00f3n y puesta en marcha<\/strong><\/p>\n<p style=\"font-size: 0.95rem; color: #555; line-height: 1.7; margin: 0;\">Los ingenieros s\u00e9nior de EVER POWER son responsables de la instalaci\u00f3n, la puesta en marcha y las pruebas de aceptaci\u00f3n. El ingeniero permanece en las instalaciones hasta que la m\u00e1quina alcanza un estado de producci\u00f3n estable y todos los operarios reciben formaci\u00f3n sobre su funcionamiento, el cambio de moldes y el mantenimiento rutinario. Los criterios de aceptaci\u00f3n se acuerdan antes del env\u00edo y se documentan en el informe de puesta en marcha.<\/p>\n<\/div>\n<div style=\"background: #eef7ff; border-radius: 8px; padding: 20px 22px; flex: 1; min-width: 220px; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\">\n<p><strong style=\"color: #1a3a6b; display: block; margin-bottom: 8px; font-size: 1.02rem;\">Programa de mantenimiento preventivo<\/strong><\/p>\n<p style=\"font-size: 0.95rem; color: #555; line-height: 1.7; margin: 0;\">EVER POWER ofrece un servicio de recordatorio de mantenimiento programado para todas las m\u00e1quinas en funcionamiento. El calendario de mantenimiento abarca tareas diarias, semanales, mensuales y anuales. El mantenimiento proactivo previene aver\u00edas imprevistas y reduce la necesidad de costosos env\u00edos de repuestos de emergencia. Los clientes que siguen el programa de mantenimiento preventivo reportan consistentemente una disponibilidad de las m\u00e1quinas superior a 95%.<\/p>\n<\/div>\n<div style=\"background: #eef7ff; border-radius: 8px; padding: 20px 22px; flex: 1; min-width: 220px; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\">\n<p><strong style=\"color: #1a3a6b; display: block; margin-bottom: 8px; font-size: 1.02rem;\">24&#215;7 Service Hotline<\/strong><\/p>\n<p style=\"font-size: 0.95rem; color: #555; line-height: 1.7; margin: 0;\">La l\u00ednea de atenci\u00f3n al cliente de EVER POWER est\u00e1 disponible las 24 horas del d\u00eda, los 7 d\u00edas de la semana. Para aver\u00edas urgentes en la producci\u00f3n, llame o env\u00ede un mensaje a la l\u00ednea de atenci\u00f3n al cliente y un ingeniero cualificado le responder\u00e1 en un plazo de 2 horas para diagnosticar el problema de forma remota. Si se requiere asistencia t\u00e9cnica presencial, EVER POWER enviar\u00e1 un t\u00e9cnico con el menor tiempo de respuesta posible para su ubicaci\u00f3n.<\/p>\n<\/div>\n<div style=\"background: #eef7ff; border-radius: 8px; padding: 20px 22px; flex: 1; min-width: 220px; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\">\n<p><strong style=\"color: #1a3a6b; display: block; margin-bottom: 8px; font-size: 1.02rem;\">Inventario de repuestos<\/strong><\/p>\n<p style=\"font-size: 0.95rem; color: #555; line-height: 1.7; margin: 0;\">EVER POWER maintains a comprehensive spare parts inventory for all EP60 components including hydraulic seals, proportional valve cartridges, heating bands, temperature sensors, drive belts and electrical components. Parts can be shipped globally within 48 hours for items in stock. Critical fast-wear items are available for customer-held local inventory based on EVER POWER recommendations.<\/p>\n<\/div>\n<div style=\"background: #eef7ff; border-radius: 8px; padding: 20px 22px; flex: 1; min-width: 220px; box-shadow: 0 4px 6px rgba(0,0,0,0.1);\">\n<p><strong style=\"color: #1a3a6b; display: block; margin-bottom: 8px; font-size: 1.02rem;\">Programas de formaci\u00f3n t\u00e9cnica<\/strong><\/p>\n<p style=\"font-size: 0.95rem; color: #555; line-height: 1.7; margin: 0;\">Adem\u00e1s de la capacitaci\u00f3n est\u00e1ndar para la instalaci\u00f3n, EVER POWER ofrece m\u00f3dulos de capacitaci\u00f3n especializados: operaci\u00f3n de la m\u00e1quina, optimizaci\u00f3n del proceso de moldeo, cambio y configuraci\u00f3n de moldes, mantenimiento del sistema hidr\u00e1ulico y resoluci\u00f3n de problemas de proceso para materiales espec\u00edficos como PP, LDPE y PCTG. La capacitaci\u00f3n puede realizarse en la f\u00e1brica de EVER POWER o en las instalaciones del cliente.<\/p>\n<\/div>\n<\/div>\n<\/section>\n<p><!-- FAQ --><\/p>\n<section style=\"padding: 48px 40px; background: #f7f9fc;\">\n<h2 style=\"font-size: clamp(1.2rem,2.8vw,1.7rem); color: #0d2b52; margin: 0 0 22px; border-bottom: 3px solid #1a6bbf; padding-bottom: 10px;\">Frequently Asked Questions &#8211; EVER POWER EP60<\/h2>\n<details style=\"background: #fff; border-radius: 8px; border: 1px solid #dde3ee; margin-bottom: 12px; box-shadow: 0 2px 4px rgba(0,0,0,0.06);\">\n<summary style=\"padding: 16px 20px; cursor: pointer; font-weight: 600; color: #1a3a6b; font-size: 0.98rem; list-style: none;\">What materials can the EP60 process?<\/summary>\n<div style=\"padding: 4px 20px 20px;\">\n<p style=\"font-size: 0.95rem; color: #444; line-height: 1.78; margin: 8px 0 0;\">The EP60 is compatible with HDPE, LDPE, PP, PS (including lactic acid bacteria grade transparent PS), ABS, EVA, bio-based corn material, PCTG, and similar thermoplastics. For engineering resins such as PC, PETG and Tritan, the screw L\/D of 22:1 and the 3+N heating zones provide the residence time and temperature profile needed for thorough, degradation-free plasticization. Confirm your resin grade with EVER POWER application engineering before ordering.<\/p>\n<\/div>\n<\/details>\n<details style=\"background: #fff; border-radius: 8px; border: 1px solid #dde3ee; margin-bottom: 12px; box-shadow: 0 2px 4px rgba(0,0,0,0.06);\">\n<summary style=\"padding: 16px 20px; cursor: pointer; font-weight: 600; color: #1a3a6b; font-size: 0.98rem; list-style: none;\">Can the EP60 be used for pharmaceutical GMP production?<\/summary>\n<div style=\"padding: 4px 20px 20px;\">\n<p style=\"font-size: 0.95rem; color: #444; line-height: 1.78; margin: 8px 0 0;\">Yes. The EP60 can be configured for pharmaceutical GMP production environments. Key features supporting GMP include: the one-step process eliminates inter-machine bottle transfer that introduces contamination risk in two-stage systems; the closed lubrication system prevents lubricant contamination of the product zone; and the machine can be specified with a stainless steel safety enclosure suitable for cleanroom installation. EVER POWER can provide equipment documentation to support IQ\/OQ\/PQ qualification processes for pharmaceutical facility validation.<\/p>\n<\/div>\n<\/details>\n<details style=\"background: #fff; border-radius: 8px; border: 1px solid #dde3ee; margin-bottom: 12px; box-shadow: 0 2px 4px rgba(0,0,0,0.06);\">\n<summary style=\"padding: 16px 20px; cursor: pointer; font-weight: 600; color: #1a3a6b; font-size: 0.98rem; list-style: none;\">How long does mould changeover take on the EP60?<\/summary>\n<div style=\"padding: 4px 20px 20px;\">\n<p style=\"font-size: 0.95rem; color: #444; line-height: 1.78; margin: 8px 0 0;\">A trained two-person team can complete a full mold changeover (injection mold, blow mold, and mandrel set) on the EP60 in approximately 2-4 hours, depending on the mold design and the changeover frequency experience of the team. PLC recipe recall eliminates parameter re-entry time for repeat mold sets. Facilities that invest in quick-release clamping plates for the mold base can reduce changeover to under 2 hours.<\/p>\n<\/div>\n<\/details>\n<details style=\"background: #fff; border-radius: 8px; border: 1px solid #dde3ee; margin-bottom: 12px; box-shadow: 0 2px 4px rgba(0,0,0,0.06);\">\n<summary style=\"padding: 16px 20px; cursor: pointer; font-weight: 600; color: #1a3a6b; font-size: 0.98rem; list-style: none;\">What certifications does the EP60 carry?<\/summary>\n<div style=\"padding: 4px 20px 20px;\">\n<p style=\"font-size: 0.95rem; color: #444; line-height: 1.78; margin: 8px 0 0;\">The EP60 is CE-marked for the European market. The machine design complies with EU Machinery Directive safety requirements including interlocked guards, emergency stop systems, and electrical safety standards. EVER POWER is an ISO-certified manufacturer. Machine documentation is provided in English and can be supplied in other languages upon request for export markets.<\/p>\n<\/div>\n<\/details>\n<details style=\"background: #fff; border-radius: 8px; border: 1px solid #dde3ee; margin-bottom: 12px; box-shadow: 0 2px 4px rgba(0,0,0,0.06);\">\n<summary style=\"padding: 16px 20px; cursor: pointer; font-weight: 600; color: #1a3a6b; font-size: 0.98rem; list-style: none;\">What is the lead time for the EP60 and an associated mould set?<\/summary>\n<div style=\"padding: 4px 20px 20px;\">\n<p style=\"font-size: 0.95rem; color: #444; line-height: 1.78; margin: 8px 0 0;\">Standard machine lead time for the EP60 is 45-75 days from order confirmation and deposit receipt, depending on production schedule at time of order. Mold sets are typically supplied in 60-90 days from final confirmation of bottle drawings and material specification. The machine and mold sets can be scheduled to arrive simultaneously for a coordinated installation. Contact EVER POWER for current lead time at time of inquiry.<\/p>\n<\/div>\n<\/details>\n<\/section>\n<p><!-- CTA AND LINKS --><\/p>\n<section style=\"padding: 48px 40px; background: linear-gradient(135deg,#0d2b52,#1a4a8a); color: #fff; text-align: center;\">\n<h2 style=\"font-size: clamp(1.2rem,2.8vw,1.7rem); color: #ffcf40; margin: 0 0 14px;\">Ready to Specify the EVER POWER EP60 for Your Production Line?<\/h2>\n<p style=\"font-size: clamp(0.95rem,2vw,1.1rem); color: #b8d4f4; line-height: 1.8; max-width: 720px; margin: 0 auto 28px;\">Env\u00ede el dibujo de su botella, el volumen deseado, las especificaciones del material y la producci\u00f3n requerida por hora a nuestro equipo de ingenier\u00eda de aplicaciones. Le confirmaremos por escrito el n\u00famero correcto de cavidades y la configuraci\u00f3n de la m\u00e1quina, y le proporcionaremos una propuesta comercial detallada en un plazo de 3 d\u00edas h\u00e1biles.<\/p>\n<div style=\"display: flex; flex-wrap: wrap; gap: 14px; justify-content: center;\"><a style=\"display: inline-block; background: #ffcf40; color: #0d2b52; font-weight: bold; padding: 15px 32px; border-radius: 6px; text-decoration: none; font-size: clamp(0.9rem,2vw,1.05rem);\" href=\"https:\/\/isbmsystem.com\/es\/product-category\/ibm-machine\/\">Explorar todas las m\u00e1quinas IBM<\/a><br \/>\n<a style=\"display: inline-block; background: transparent; color: #fff; font-weight: 600; padding: 15px 32px; border-radius: 6px; text-decoration: none; font-size: clamp(0.9rem,2vw,1.05rem); border: 2px solid rgba(255,255,255,0.4);\" href=\"https:\/\/isbmsystem.com\/es\/\">Fabricante de m\u00e1quinas de moldeo por inyecci\u00f3n-soplado EVER POWER<\/a><br \/>\n<a style=\"display: inline-block; background: transparent; color: #fff; font-weight: 600; padding: 15px 32px; border-radius: 6px; text-decoration: none; font-size: clamp(0.9rem,2vw,1.05rem); border: 2px solid rgba(255,255,255,0.4);\" href=\"https:\/\/isbmsystem.com\/es\/sobre-nosotros\/\">Acerca de EVER POWER<\/a><\/div>\n<\/section>\n<\/div>","protected":false},"excerpt":{"rendered":"<p>EVER POWER EP60 IBM machine features 600KN injection clamping force, 260-383g injection weight, 4s dry cycle and up to 14-cavity output. Ideal for pharmaceutical pill bottles, eye drops, cosmetic containers 1-2000ml. European-style structure, servo-hydraulic system, 52-70% operating efficiency. CE ISO certified. Request a quote.<\/p>","protected":false},"featured_media":584,"template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[32],"product_tag":[],"class_list":["post-595","product","type-product","status-publish","has-post-thumbnail","product_cat-ibm-machine","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/isbmsystem.com\/es\/wp-json\/wp\/v2\/product\/595","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/isbmsystem.com\/es\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/isbmsystem.com\/es\/wp-json\/wp\/v2\/types\/product"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/isbmsystem.com\/es\/wp-json\/wp\/v2\/media\/584"}],"wp:attachment":[{"href":"https:\/\/isbmsystem.com\/es\/wp-json\/wp\/v2\/media?parent=595"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/isbmsystem.com\/es\/wp-json\/wp\/v2\/product_brand?post=595"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/isbmsystem.com\/es\/wp-json\/wp\/v2\/product_cat?post=595"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/isbmsystem.com\/es\/wp-json\/wp\/v2\/product_tag?post=595"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}