Máquina de moldeo por soplado de un solo paso, doble fila y 4 estaciones

Máquina de moldeo por soplado de un solo paso
Categoría: Etiquetas: ,

Dominate production with the EPY250-V4-B Double-Row ISBM Machine. 16-Ton system running up to 28 cavities. 300KN injection force for high-volume 15ml-1000ml bottles.

Consulta

Technical Specifications: EPY250-V4-B (Double Row)

Norma técnica
01 Using 3 sets of servo pump systems;
02 Inovance/ WEICHI servo motor power: 67.7KW;
03 Utilizando el PLC Inovance/MiRLE;
04 La plataforma giratoria está equipada con un servomotor Yaskawa de Japón o un servomotor WEICHI con un reductor TSUNTIEN de Taiwán;
05 La estructura de moldeo por soplado adopta un sistema de sujeción del molde mediante cilindro hidráulico o servomotor doble con función de compensación de alta presión;
06 Utilizando la válvula de alta presión Parker estadounidense;
07 Utilizando el cilindro neumático Airtak;
08 Using integrated control box to control temperature, which is highly accurate, stable, and easy to operate; alternatively, you can choose the system's built-in temperature control system;
09 Utilizando una válvula de control de presión hidráulica de YUKEN de Taiwán, China;
10 The screw is heated by a nano-far-infrared energy-saving heating ring(15KW);
11 The injection unit is controlled by single cylinder. The melt motor may be controlled either hydraulically or by a servo motor;
12 El tubo de aceite está fabricado con material importado de Italia;
13 Total power of the machine: 82.7KW.
Parámetros de la máquina
Diámetro del tornillo 60mm(optional)
Capacidad de inyección teórica 680g
Fuerza de sujeción de la inyección 300KN
Trazo superior del molde 600mm
TEMP. Regulación de la carrera del corazón 250 mm
TEMP. carrera del cañón de regulación 250 mm
golpe de salida 200mm
Fuerza de sujeción por soplado 250KN (single side)
Golpe de núcleo 300mm
Golpe de moldeo por soplado 75+75 mm
Tanque de aceite VOL 300 litros
Tamaño (largo × ancho × alto) 5.2 * 2.5 * 3.8m
Peso 16T
Especificaciones de la máquina
Artículo Unidad Valores
Nombre - Máquina de moldeo por soplado y estirado por inyección de un solo paso (4 estaciones)
Modelo - EPY250-V4-B (Double Row Machine)
Fabricante - Poder eterno
Material - PET/PETG
Diámetro del tornillo MM 50 55 60 /
Volumen de inyección teórico CM³ 315 442 480 /
Velocidad de rotación del tornillo RPM 270 180 150 ~ 220 /
Fuerza de sujeción por inyección KN 300
Fuerza de sujeción por soplado KN 250
Potencia del motor KW 67.7
Potencia de calentamiento KW 15
Presión de soplado de aire Mpa 2.0-3.5
Presión del agua de refrigeración Mpa 0.4-0.6
Presión del agua del enfriador de aceite de la máquina Mpa 0.3-0.4
Temperatura del agua del enfriador de aceite de la máquina °C 20-25
Voltaje V 370-400
Tamaño (L*An*Al) MM 5200 x 2500 x 3800
Peso T 16
Dimensiones del producto
Cantidad de producto PCS 8 10 12 14 16 20 24 28
Diámetro de la botella MM 85 85 79 66 54 45 37 25
Altura de la botella MM 260
Diámetro del cuello MM 58 56 48 38 32 26 24 15
Volumen máximo de la botella ML 1000 900 800 600 400 250 100 50
Peso máximo de la botella GRAMO 55 44 36 32 28 25 20 15

Double-Row Configuration | Up to 28 Cavities | 16-Ton Industrial Grade

El EPY250-V4-B redefines efficiency with its specialized Double-Row (Dual-Bank) mold design. Built on a massive 16-ton chassis with 300KN clamping force, this machine is specifically engineered to double your output capacity for small bottles, running up to 28 cavities in a single cycle.

EPY250-V4-B Double Row Blow Molding Machine

The Mass Production Specialist

While standard machines operate with a single row of cavities, the EPY250-V4-B utilizes a wider platen and advanced manifold system to fill two rows of molds simultaneously. This allows for extreme cavitation density—producing **28 bottles (15-50ml)** or **8 large bottles (1000ml)** every cycle.

Ideally suited for the pharmaceutical (vaccine vials, eye drops) and cosmetic (sample bottles, hotel amenities) industries, this machine delivers the lowest cost-per-bottle in its class without compromising on precision.

⚡ Output Capability:

  • Small Bottles (15-50ml): 20 to 28 Cavities
  • Medium Bottles (100-400ml): 14 to 16 Cavities
  • Large Bottles (800-1000ml): 8 to 12 Cavities

 

Powering Double-Row Performance

Heavy-Duty Servo Hydraulics

Running 28 cavities requires immense, stable power. The EPY250-V4-B uses 3 conjuntos de sistemas de servobombas with a 67.7KW motor to ensure every cavity receives identical pressure.

Nano-Tech Heating

El Anillo calefactor de infrarrojo lejano nano de 15 kW provides the thermal energy needed to plasticize 680g of material rapidly, keeping up with the fast cycle times of double-row molds.

Global Reliability

We use trusted global components: Inovance/MIRLE PLC for logic control, Parker (EE. UU.) valves for pressure stability, and Yaskawa (Japón) servos for precise indexing.

Engineered for Scale

Large Machine Assembly
Ever-Power Factory
QC Inspection

Air Supply for 28 Cavities: Oil-Free & Stable

Blowing 28 bottles simultaneously creates a massive instantaneous demand for compressed air. A pressure drop during this split-second can lead to high reject rates.

Ever-Power supplies industrial-grade Compresores de aire de tornillo sin aceite sized specifically for the EPY250-V4-B's surge demand. This ensures every one of the 28 cavities forms a perfect bottle, while keeping the air 100% oil-free for medical and cosmetic safety.

Compresor de aire de tornillo sin aceite para ISBM

Preguntas frecuentes

1. What is the main advantage of the "Double-Row" configuration?

It doubles your production capacity without needing two separate machines. By arranging molds in two parallel rows, you can produce up to 28 small bottles per cycle, maximizing output per square meter of factory floor.

2. What is the cycle time for 28 cavities?

Cycle times depend on the preform thickness, but the machine is optimized for high speed. With the 300KN clamping force and rapid cooling, cycle times are comparable to smaller machines, resulting in vastly higher daily throughput.

3. Can this machine produce 1 Litre bottles?

Yes. While it shines with small bottles, it can be configured with an 8-cavity mold to produce bottles up to 1000ml with a diameter of 85mm.

4. Does Ever-Power make the double-row molds?

Yes. Double-row molds require high-precision engineering to ensure balanced flow to all 28 cavities. We design and manufacture these high-cavitation molds in-house to guarantee they work perfectly with the EPY250-V4-B.

5. Is the machine difficult to set up?

The machine uses an advanced Inovance/MIRLE PLC with a user-friendly interface. It includes storage for mold recipes, making changeovers straightforward for trained technicians.

Maximize Your Output with Double-Row Technology

Información adicional

Editado por

¿qué?

Productos relacionados

[crp]