4-اسٹیشن 28-ٹن بڑی شکل والی ایک قدمی ISBM مشین
Produce large containers with the EPY650-V4 28-Ton One-Step ISBM Machine. Features 400KN clamping force, 4-station rotary process, and 20L bottle capacity. Ideal for PC water barrels and wide-mouth jars.
Technical Specifications: EPY650-V4
| تکنیکی معیار | |
|---|---|
| 01 | Using 3 sets of servo pump systems; |
| 02 | Inovance/ WEICHI servo motor power: 75KW; |
| 03 | Inovance/MIRLE PLC کا استعمال؛ |
| 04 | ٹرن ٹیبل جاپان یاسکاوا سروو موٹر یا تائیوان TSUNTIEN ریڈوسر کے ساتھ WEICHI سروو موٹر سے لیس ہے۔ |
| 05 | بلو مولڈنگ ڈھانچہ ہائیڈرولک سلنڈر یا ڈوئل سرو موٹر مولڈ کلیمپنگ سسٹم کو ہائی پریشر معاوضے کے فنکشن کے ساتھ اپناتا ہے۔ |
| 06 | امریکن پارکر ہائی پریشر والو کا استعمال؛ |
| 07 | Airtak ایئر سلنڈر کا استعمال کرتے ہوئے؛ |
| 08 | Using integrated control box to control temperature, which is highly accurate, stable, and easy to operate; alternatively, you can choose the system's built-in temperature control system; |
| 09 | تائیوان، چین سے یوکین کے ہائیڈرولک پریشر کنٹرول والو کا استعمال؛ |
| 10 | آئل ٹیوب اٹلی سے درآمد شدہ مواد سے بنی ہے۔ |
| 11 | The screw is heated by a nano-far-infrared energy-saving heating ring(15KW); |
| 12 | The injection unit is controlled by single cylinder. The melt motor may be controlled either hydraulically or by a servo motor; |
| 13 | Total power of the machine: 90.7KW. |
| مشین پیرامیٹر | |
|---|---|
| سکرو قطر | 60mm(optional) |
| نظریاتی انجکشن کی صلاحیت | 480g |
| انجیکشن کلیمپنگ فورس | 400KN |
| اوپری مولڈ اسٹروک | 1070mm |
| لوئر مولڈ اسٹروک | 550mm |
| TEMP کور اسٹروک کو منظم کرنا | 300mm |
| TEMP بیرل اسٹروک کو منظم کرنا | 300mm |
| ٹیک آؤٹ اسٹروک | 300mm |
| اڑانے والی کلیمپنگ فورس | 400KN (single side) |
| بلو کور اسٹروک | 300mm |
| بلو مولڈ اسٹروک | 175+175mm |
| آئل ٹینک VOL | 600L |
| سائز (L×W×H) | 6.1 * 2.6 * 4.2m |
| وزن | 28T |
| مشین کی تفصیلات | |||||
|---|---|---|---|---|---|
| آئٹم | یونٹ | اقدار | |||
| نام | - | One-step Injection Stretch Blow Moulding Machine (4-station) | |||
| ماڈل | - | EPY650-V4 | |||
| کارخانہ دار | - | ایور پاور | |||
| مواد | - | PET/PETG | |||
| سکرو قطر | ایم ایم | 50 | 55 | 60 | / |
| نظریاتی انجکشن والیوم | CM³ | 340 | 420 | 480 | / |
| اسکرو گھومنے والی رفتار | RPM | 180 | 150 | 150 ~ 220 | / |
| انجیکشن کلیمپنگ فورس | کے این | 400 | |||
| اڑانے والی کلیمپنگ فورس | کے این | 400 | |||
| موٹر پاور | کلو واٹ | 75.7 | |||
| حرارتی طاقت | کلو واٹ | 15 | |||
| ہوا کا دباؤ | ایم پی اے | 2.0-3.5 | |||
| کولنگ واٹر پریشر | ایم پی اے | 0.4-0.6 | |||
| مشین آئل کولر واٹر پریشر | ایم پی اے | 0.3-0.4 | |||
| مشین آئل کولر پانی کا درجہ حرارت | °C | 20-25 | |||
| وولٹیج | وی | 370-400 | |||
| سائز (L*W*H) | ایم ایم | 6100 x 2600 x 4200 | |||
| وزن | ٹی | 28 | |||
| مصنوعات کے طول و عرض | |||||
|---|---|---|---|---|---|
| مصنوعات کی مقدار | پی سی ایس | 1 | 2 | 3 | 4 |
| بوتل کا قطر | ایم ایم | 280 | 235(280) | 230 | 180 |
| بوتل کی اونچائی | ایم ایم | 510 | |||
| گردن کا قطر | ایم ایم | 140 | 120 | 90 | 84 |
| زیادہ سے زیادہ بوتل کا حجم | ایل | 20 | 20 | 12 | 5 (7) |
| زیادہ سے زیادہ بوتل کا وزن | جی | 900 | 460 | 310 | 230 |
400KN Clamping Force | Up to 20L Capacity | 4-Station Rotary Precision
دی EPY650-V4 is the heavy industrial leader of the EPY series. Weighing in at 28 Tons and boasting a 400KN clamping force, it is engineered for the massive production of large-volume containers, such as 5-gallon PC water barrels, 20L edible oil containers, and wide-mouth jars.
Machine Capabilities
دی EPY650-V4 integrated blow molding machine is designed to handle the toughest molding challenges. Its massive platens and extended stroke (1070mm upper / 550mm lower) allow for deep-draw containers that smaller machines simply cannot produce.
Whether you need to produce a single 20L PC water barrel or four 5L PET oil bottles per cycle, the EPY650-V4 delivers consistent wall thickness and high optical clarity, free from the hazing often seen in two-step processes.
💪 Heavy-Duty Specifications:
- انجکشن کلیمپنگ: 400 KN
- بلونگ کلیمپنگ: 400 KN
- Shot Size: Up to 480g (Theoretical)
- Max Bottle Size: 20 Liters (280mm Diameter)
How It Works: The 4-Station ISBM Principle
The EPY650-V4 utilizes a 4-station rotary table system that rotates 90 degrees every cycle. This integrates the entire production line into one compact unit, ensuring energy efficiency and superior bottle quality.
Molten plastic (PET/PC/PP) is injected into a cooled mold to form the preform. The neck finish is molded to exact tolerances here, ensuring a leak-proof seal for the final cap.
The hot preform is transferred here for temperature equalization. Heating pots or cooling rods adjust the preform's thermal profile, which is critical for blowing uniform walls in square or oval containers.
The conditioned preform is stretched axially by a rod and expanded radially by high-pressure air (up to 3.5 MPa). This biaxial orientation significantly increases the bottle's strength and clarity.
The finished bottle cools and is automatically ejected onto a conveyor. Since the bottle never touches the floor or manual handling during forming, it remains pristine and scratch-free.
Technical Specifications: EPY650-V4
(موبائل پر مکمل ٹیبل دیکھنے کے لیے بائیں/دائیں سوائپ کریں)
Engineered for Performance
Triple-Servo Power
The EPY650-V4 is powered by سرو پمپ سسٹم کے 3 سیٹ totaling 75.7KW of motor power. This hybrid drive provides the immense force needed for large platens while maintaining the energy efficiency of a servo machine.
نینو انفراریڈ ہیٹنگ
A massive 15KW Nano-far-infrared heating ring ensures the screw plasticizes large volumes of material rapidly and uniformly. This is critical for maintaining cycle speeds when producing heavy 20L containers.
Global Component Sourcing
We utilize only the best: Inovance/MIRLE PLC for control, پارکر (امریکہ) for pneumatic stability, and یوکن (تائیوان) for hydraulic precision. This ensures 24/7 reliability in demanding industrial environments.
Our Manufacturing Scale
Air Supply for 20L Containers
Blowing a 20-liter container requires a massive volume of air delivered instantly. Stability is key—any pressure fluctuation results in thin walls or blown-out bottoms.
Ever-Power supplies matched High-Volume Oil-Free Screw Air Compressors designed for large-format molding. These compressors ensure that the large volume of air needed (at 2.0-3.5 MPa) is delivered cleanly and consistently, ensuring your large containers are safe for food and water storage.
ہمارے کلائنٹس کیا کہتے ہیں۔
"The EPY650-V4 has revolutionized our 5-gallon water bottle production. The one-step process gives us a crystal-clear finish that our old machines couldn't match, and the scrap rate is virtually zero."
"We needed a machine capable of producing heavy, wide-mouth jars for food service. The 400KN clamping force on the EPY650 is incredible—it holds the mold perfectly shut even with 4 cavities running."
اکثر پوچھے گئے سوالات
1. Can this machine produce 5-gallon PC water bottles?
Yes. The EPY650-V4 is specifically designed for large containers. In a 2-cavity configuration, it can produce 20L (approx. 5 gallon) bottles with ease.
2. What is the advantage of one-step molding for large bottles?
Two-step processes for large bottles often result in hazing or scratches on the preforms due to handling. The one-step process eliminates preform handling, resulting in a blemish-free, high-gloss surface that is superior for premium water and oil brands.
3. What is the total power consumption?
The installed power is 90.7 KW. However, thanks to the triple-servo pump system, the machine only consumes significant power during active movements. The holding phase consumes very little energy compared to hydraulic machines.
4. How heavy is the machine?
The machine weighs 28 Tons. This extreme weight provides the necessary rigidity to prevent platen deflection under the 400KN clamping load.
5. Do you provide the molds for 20L bottles?
Yes. We design and manufacture large-format molds in-house. We can optimize the preform design to ensure the best wall thickness distribution for your specific bottle shape.
Ready for Large-Scale Production?
اضافی معلومات
| کی طرف سے ترمیم | کیوں |
|---|
